Airtac GC FRL Unit GC200C06F2W
The AirTAC Airtac GC FRL Unit GC200C06F2W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C06F2W
The AirTAC GC series is a three-unit F.R.L. combination made up of a separate air filter, pressure regulator and lubricator, so filtration, regulation and oil mist are delivered in the right order with each unit serviceable on its own. This version is the 200 size with PT1/8 ports and a 5 um filter element (W option), drained by the differential-pressure method from its polycarbonate bowl. The regulator carries an embedded square gauge in psi scale, convenient where the plant reads imperial units. It handles compressed air at up to 1.0 MPa (145 psi) between -5 and 70 C (non-freezing).
This is a genuine AirTAC part. The GC range is offered in 200, 300, 400 and 600 sizes with manual or automatic drain options, 40 um and 5 um elements, MPa/psi/bar gauge scales, G (BSPP) and NPT thread options, and an optional check valve. Flow is published as curves rather than a single rating, so we will confirm datasheet figures on request.
Airtac GC FRL Unit GC200C06F2W Technical Specifications
| Model | Airtac GC FRL Unit GC200C06F2W |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C06F2W
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C06F2W Is Used
Pneumatic press station
Conditions the air supply to a small pneumatic press used for staking and marking in a job shop.
Process valve pilot air
Supplies filtered, regulated and oiled pilot air to pneumatically actuated process valves on a skid.
Truck workshop tyre bay
A point-of-use F.R.L. at a tyre-changing machine in a commercial vehicle workshop, read in psi.
Is the Airtac GC FRL Unit GC200C06F2W the Right Station?
This is the smallest GC size at PT1/8; choose 300/400/600 for larger ports and flow. The W element filters to 5 um instead of the 40 um standard, and the F2 gauge code gives you the embedded square gauge in psi instead of MPa (bar is also offered). Drain is the differential-pressure type; manual and automatic drain codes exist. PT is the standard thread, with G and NPT available to order.
Because flow appears only as curves in the datasheet, ask us to confirm the sizing against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C06F2W FAQ
AirTAC publishes GC series flow as curves, not as a single rated figure, so the honest way to size it is against those curves. Send us your application details and we will confirm the relevant flow and datasheet figures on request before you order.
Yes. The embedded square gauge is offered in MPa, psi and bar scales; this unit carries the psi (F2) version. Just pick the matching gauge code when you select your model.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C06F2W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.