AirTAC GC300-08 FRL Unit (GC30008F1)
The AirTAC AirTAC GC300-08 FRL Unit (GC30008F1) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC300-08 FRL Unit (GC30008F1)
GC30008F1 is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator units assembled as one set for compressed air. This 300-size unit is threaded PT1/4, uses the standard 40 um filter element with the differential-pressure drain, and carries the embedded square pressure gauge on the MPa scale. No reverse (check) valve is fitted on this code.
This is a genuine AirTAC part. The G-series F.R.L. sets are available in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) fine filtration, MPa, psi or bar gauge scales, and G(BSPP) or NPT thread options. Maximum working pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for this exact model on request.
AirTAC GC300-08 FRL Unit (GC30008F1) Technical Specifications
| Model | AirTAC GC300-08 FRL Unit (GC30008F1) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC300-08 FRL Unit (GC30008F1)
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC300-08 FRL Unit (GC30008F1) Is Used
Pick-and-place gantry cylinders
Conditions the supply to the horizontal and vertical cylinders of a pneumatic pick-and-place gantry, with the regulator set to the cycle's working pressure.
Control cabinet air prep
Mounted at the air inlet of a machine control cabinet, providing filtered, regulated and lubricated air to the valve manifold downstream.
Panel-mounted multi-drop supply
Feeds a bank of individually valved outlets on a machine's air panel, giving one conditioned supply point for several sub-circuits.
Is the AirTAC GC300-08 FRL Unit (GC30008F1) the Right Station?
The 300 size with 1/4 in port is the general-purpose step in the G-series; move to 200 for compact drops or 400/600 for larger ports and higher flow bands. The drain here is the differential-pressure default - automatic (A) or manual (M) drains are separate codes. Filtration is the standard 40 um grade, upgradeable to 5 um (W). This code specifies the embedded square gauge in MPa; round external gauges with MPa, psi or bar scales are alternatives, and G(BSPP) or NPT threads can be ordered instead of the PT standard. AirTAC publishes flow as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC GC300-08 FRL Unit (GC30008F1) FAQ
AirTAC publishes flow for the G-series as curves rather than a single rated figure, so we do not quote a number here. Send us your inlet pressure, set pressure and required flow, and we will confirm the datasheet curve for this 300-size, 1/4 in set before you order.
It selects the embedded square pressure gauge with an MPa scale. Other gauge options in the series are the round external gauge with MPa (C1), psi (C2) or bar (C3) scales, or N for no gauge at all. The rest of this code - 300 size, 1/4 in PT port, differential-pressure drain, 40 um element, no check valve - is the standard GC30008 configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC300-08 FRL Unit (GC30008F1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.