AirTAC GC400-10 FRL Unit (GC40010F1)
The AirTAC AirTAC GC400-10 FRL Unit (GC40010F1) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC400-10 FRL Unit (GC40010F1)
The AirTAC GC series combines a separate air filter, pressure regulator and oil-mist lubricator in one three-piece F.R.L. set. The GC40010F1 is set up for 3/8 in PT ports in size 400, uses the standard 40 um filter element with the default differential-pressure drain, and is ordered with the square pressure gauge on an MPa scale, the compact reading panel the series fits on the regulator.
This is a genuine AirTAC part. The series is available in sizes 200, 300, 400 and 600, with PT, G (BSPP) or NPT threads, 40 um or 5 um filtration, and MPa, psi or bar gauge scales. Maximum working pressure is 1.0 MPa (145 psi) with an operating range of -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and full datasheet figures on request.
AirTAC GC400-10 FRL Unit (GC40010F1) Technical Specifications
| Model | AirTAC GC400-10 FRL Unit (GC40010F1) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC400-10 FRL Unit (GC40010F1)
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC400-10 FRL Unit (GC40010F1) Is Used
Vertical Machining Center Chip Conveyors
Condition the air driving the paddle cylinders and gates of a chip conveyor on a vertical machining center, all from one 3/8 in conditioning set at the machine base.
Panel Saw Clamp Beam
Feed the hold-down clamp beam of a panel saw with filtered, regulated and lubricated air so saw-duty cylinders keep consistent lubrication through repeated cutting cycles.
Lab Automation Actuator Rail
Supply the lift-and-press cylinders on a laboratory automation rail, where the square MPa gauge gives technicians a compact, readable pressure reference at the manifold.
Is the AirTAC GC400-10 FRL Unit (GC40010F1) the Right Station?
Stay with size 400 at 3/8 in PT for medium-flow circuits, or step to size 300 or 600 where the catalogue flow curves show a better match. The 40 um element covers general machine-air duty; choose a W code for 5 um filtration. The F option gives the square gauge reading in MPa; round gauges and psi or bar scales are on other codes.
PT is the standard thread, with G (BSPP) and NPT available as catalogue options to order. The filter bowl is polycarbonate at size 400 with differential-pressure drain. Because flow is published only as curves, send us your application and we will confirm the right size before you order.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC GC400-10 FRL Unit (GC40010F1) FAQ
We do not quote a rated flow figure because AirTAC publishes G-series flow as curves, not a single number. Tell us your line's duty and we will confirm capacity and sizing from the datasheet on request before you order.
Both are size 400, three-unit F.R.L. sets for 3/8 in PT with a 40 um element. F1 specifies the square gauge on an MPa scale, while C1 specifies the external round gauge in MPa. Pick the style your panel layout prefers; both read the same pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC400-10 FRL Unit (GC40010F1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.