AirTAC GC400-15 FRL Unit (GC40015LF1)
The AirTAC AirTAC GC400-15 FRL Unit (GC40015LF1) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/2"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC400-15 FRL Unit (GC40015LF1)
The AirTAC GC40015LF1 is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one set. It filters water and particulate to 40 um, regulates pressure with its low-pressure (L) type regulator, lubricates downstream equipment with oil mist and drains condensate through the differential-pressure bowl. The 400 size carries a PT1/2 port, and the MPa square gauge is fitted for pressure setting.
This is a genuine AirTAC part from the 200/300/400/600 G-series range, with ports from 1/8" to 1", G(BSPP) and NPT thread variants, automatic, manual or differential-pressure drains and a 5 um filter option. Flow is published as curves rather than a single rating, so we confirm datasheet figures for your application on request.
AirTAC GC400-15 FRL Unit (GC40015LF1) Technical Specifications
| Model | AirTAC GC400-15 FRL Unit (GC40015LF1) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC400-15 FRL Unit (GC40015LF1)
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC400-15 FRL Unit (GC40015LF1) Is Used
Injection-molding ejector and core-pull circuits
Prepares the air feeding ejector and core-pull pneumatics on a molding machine, filtering plant air, holding a stable low set pressure and oiling the cylinders through each cycle.
Trailer dock-leveller and door systems
Supplies regulated, lubricated air to the dock levellers and roller-shutter door actuators at a loading bay, where the differential drain sheds condensate between movements.
Assembly-station air tools
Feeds nutrunners and air ratchets at a manual assembly station, with filtration keeping the tools clean, the regulator holding torque-consistent pressure and oil mist extending tool life.
Is the AirTAC GC400-15 FRL Unit (GC40015LF1) the Right Station?
Match the 400 size and its 1/2" port to the machine's air demand; other sizes step the port between 1/8" and 1". Drain here is the differential-pressure default, with automatic (A) and manual (M) variants available. Filtration is the 40 um standard element - choose the W suffix for 5 um if pilot valves need finer protection. The F code fits the embedded square gauge with an MPa scale; round-gauge and psi/bar-scale versions are catalogue options. Thread is PT as standard, with G(BSPP) and NPT orderable, and a bracket is included.
Flow for this series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC GC400-15 FRL Unit (GC40015LF1) FAQ
Flow for the GC series is published as characteristic curves rather than a single rated figure, so there is no one number we can quote as a rating. Tell us your downstream consumption and we will confirm the flow curve and datasheet figures for this 400-size, 1/2"-port set on request before you order.
The F1 suffix fits the embedded square gauge with an MPa scale, the standard regulator-indication arrangement for this series. The C code instead specifies the optional external round gauge, also available in MPa, psi or bar scales. Both read the regulated outlet pressure - the choice is gauge style and mounting, with either orderable on the GC400 1/2" set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC400-15 FRL Unit (GC40015LF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.