Airtac GC FRL Unit GC400C10MC1WK
The AirTAC Airtac GC FRL Unit GC400C10MC1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC400C10MC1WK
GC400C10MC1WK is a genuine AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator supplied as one set for compressed air only. This size 400 set is ported 3/8 in. with PT as the standard thread, and the code decodes to a 5 um filter element (W), manual drain bowls (M), an external round pressure gauge reading in MPa (C1) and a fitted reverse/check valve (K). Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the filter and lubricator bowls are polycarbonate at this size. With manual drain, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi).
As a genuine AirTAC part, this set belongs to the GC series offered in sizes 200, 300, 400 and 600, with ports from 1/8 in. to 1 in. Drain type, 5 um filtration, gauge scale, check-valve option and G (BSPP) or NPT threads are all orderable choices. Series flow is published as curves rather than a single rated figure, so ask us to confirm sizing and the datasheet before ordering.
Airtac GC FRL Unit GC400C10MC1WK Technical Specifications
| Model | Airtac GC FRL Unit GC400C10MC1WK |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC400C10MC1WK
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC400C10MC1WK Is Used
Paint and powder-coat spray lines
Supplies spray guns and atomising stations with clean, regulated, lubricated air. The 5 um element protects finish quality and the check valve keeps the treated-air leg isolated from upstream disturbances on shared shop air.
CNC clamping and tool-change circuits
Feeds pneumatic clamps, drawbar and tool-changer circuits on a machining centre. The check valve helps hold the set downstream pressure if supply dips, while the MPa gauge gives a direct readout of clamp setpoint.
Packaging and case-sealing conveyors
Runs cylinders and valves on carton sealers, case erectors and diverters along a packaging line, where the lubricator keeps actuation components running smoothly through multi-shift production.
Is the Airtac GC FRL Unit GC400C10MC1WK the Right Station?
Size the set by stepping through GC200, GC300, GC400 and GC600 to the port and flow your circuit needs; this 400 unit is 3/8 in. PT. This code adds the K option, a reverse/check valve, which suits installations where backflow through the treatment set must be prevented. Manual drain (M) fits points of use an operator visits routinely, while automatic and differential-pressure drains suit unattended locations. The 5 um element gives finer protection than the 40 um standard, and the round external gauge reads MPa with psi or bar scales available. PT is the standard thread; G (BSPP) and NPT are orderable. Since flow is published as curves rather than a single rating, ask us to confirm the datasheet against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
Airtac GC FRL Unit GC400C10MC1WK FAQ
AirTAC publishes flow for the GC series as performance curves, not as a single rated figure, so we do not state a number. Share your operating pressure and air consumption and we will confirm the datasheet curve for this 3/8 in. size 400 set on request.
It means a reverse/check valve is fitted on this set, in addition to the standard filter, regulator and lubricator functions. If you do not need the check valve, the same set without the K is GC400C10MC1W; otherwise the decode is identical: manual drain, 5 um element and a round MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC400C10MC1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.