Airtac GC FRL Unit GC400C15MN
The AirTAC Airtac GC FRL Unit GC400C15MN is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC400C15MN
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and a lubricator working as one coordinated set, so the compressed air feeding your circuit is cleaned, regulated and oiled in sequence. This GC400C15MN is the size 400 unit with a PT1/2 (1/2 in) port, a manual drain on the filter bowl, standard 40 um filtration, the standard regulator type and no gauge fitted. With manual drain, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi); the set is rated for a 1.0 MPa (145 psi) maximum working pressure and -5 to 70 C, non-freezing. At size 400 the filter and lubricator bowls are polycarbonate.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600, with drain choices (differential-pressure, automatic or manual), an optional 5 um filter element, gauge options, a reverse/check valve code and G (BSPP) or NPT thread variants to order. Flow is published as curves rather than a single rating, so ask us to confirm sizing and the datasheet figures for your application.
Airtac GC FRL Unit GC400C15MN Technical Specifications
| Model | Airtac GC FRL Unit GC400C15MN |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC400C15MN
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC400C15MN Is Used
Carton sealing line
Feeding clean, regulated and lubricated air to the clamp and flap-fold cylinders of a carton sealing and case-packing machine, with the manual drain emptied at scheduled changeovers.
CNC work-holding air
Supplying the pneumatic clamps and air tools around a CNC machining centre, with the lubricator delivering the oil mist that clamping cylinders and impact tools need for smooth, long-running service.
Bottling conveyor actuators
Regulating pressure and feeding oil mist to the pusher, stopper and lift cylinders along a bottling-hall conveyor, with 40 um filtration protecting the directional control valves.
Is the Airtac GC FRL Unit GC400C15MN the Right Station?
Size 400 with a 1/2 in port sits in the upper-middle of the G range; if a size 300 leaves no flow headroom on your line, stepping up to 400 is the usual move, and size 600 covers heavier duty - we can read the published flow curves against your demand before you order. The M code gives a manual drain, so condensate is emptied by hand during inspection rounds; automatic or differential-pressure drain codes are available if you prefer unattended drainage. Standard filtration is 40 um; the W code gives 5 um where finer protection is needed. The N code means no gauge is supplied, though gauge and scale options exist in the series. PT is the standard thread, with G (BSPP) and NPT variants to order, and a bracket is included. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
Airtac GC FRL Unit GC400C15MN FAQ
AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not quote one number here. Send us your operating pressure and air demand and we will confirm the sizing and the datasheet figures for this model on request.
The M code specifies a manual drain on the filter bowl: condensate is released by opening the drain by hand during inspection rounds. If you want drainage without routine attention, the same size is available with an automatic or differential-pressure drain code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC400C15MN
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.