AirTAC GC600-20 FRL Unit (GC60020F1W)
The AirTAC AirTAC GC600-20 FRL Unit (GC60020F1W) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT3/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC600-20 FRL Unit (GC60020F1W)
The AirTAC GC series is a three-unit F.R.L. combination: separate filter, regulator and lubricator units conditioning compressed air in one line. This GC60020F1W is the 600 size with a 3/4 in PT port, the standard differential-pressure drain and a 5 um filter element - the W grade, finer than the standard 40 um. It carries an embedded square pressure gauge scaled in MPa, and with the differential-pressure drain the regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi). Maximum working pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), the medium is compressed air only, and at the 600 size the filter bowl is aluminium alloy.
This is a genuine AirTAC part. The G series spans sizes 200, 300, 400 and 600 with a choice of ports, drains, filter grades, gauges and threads, so the set can be matched to most plant air mains. Flow for the series is published as performance curves rather than a single rated figure; we confirm the datasheet and flow data for this model on request.
AirTAC GC600-20 FRL Unit (GC60020F1W) Technical Specifications
| Model | AirTAC GC600-20 FRL Unit (GC60020F1W) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC600-20 FRL Unit (GC60020F1W)
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC600-20 FRL Unit (GC60020F1W) Is Used
Laboratory test rig actuation
Supplies regulated, oil-misted air to the cylinders and directional valves on a materials test rig, where the 5 um element is selected because the standard 40 um grade is too coarse for the rig's finer pneumatic components.
Electronics assembly cell
Conditions air for pick-and-place cylinders and actuated valves on an electronics assembly cell; the W grade is specified where the standard 40 um element does not give the cleanliness the cell's valves need.
Automotive weld cell clamps
Feeds the pneumatic clamp cylinders on a robotic weld cell fixture, combining regulation at the cell with fine 5 um filtration ahead of the directional valves that sequence the clamps.
Is the AirTAC GC600-20 FRL Unit (GC60020F1W) the Right Station?
The decodable choices: this is a 600 with a 3/4 in PT connection - the largest size step in the G series - so pick the size against the flow your main consumes. Drain is the standard differential-pressure type on this code; automatic and manual drain versions are separate models. Filter grade is the 5 um W element here; choose a code without W if the standard 40 um grade is sufficient, since the finer element is a real selection decision, not a free upgrade. Gauge is the square type scaled in MPa; round bar-scale and no-gauge options are separate codes. Thread is PT as the standard, with G (BSPP) and NPT available as catalogue options.
Flow is published as curves rather than one rated number, so ask us to confirm sizing against the datasheet for your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC GC600-20 FRL Unit (GC60020F1W) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so no flow number is quoted here. Request the datasheet from us and we will confirm the flow data for the 600 / 3/4 in set against your application before you order.
The standard 40 um grade suits general actuation circuits; the W grade filters down to 5 um and is the right choice when downstream valves or cylinders are sensitive to finer particles. On this model the W grade is combined with the MPa square gauge; other grade and gauge combinations exist as separate codes.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC600-20 FRL Unit (GC60020F1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.