AirTAC GC600-20 FRL Unit (GC60020MF1WK)
The AirTAC AirTAC GC600-20 FRL Unit (GC60020MF1WK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT3/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC600-20 FRL Unit (GC60020MF1WK)
GC60020MF1WK is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator that together clean, regulate and oil-mist lubricate the compressed air at one supply point. This 600-size unit is configured for 3/4 in PT ports, with a manual-drain bowl, the W-coded 5 um fine filter element, a square pressure gauge reading in MPa, and a reverse (check) valve fitted. At the 600 size, the filter and lubricator bowls are aluminium alloy.
As a catalogue AirTAC part it is rated for compressed air at up to 1.0 MPa (145 psi) inlet, working from -5 to 70 C (non-freezing). With this manual-drain configuration the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). Flow figures for the GC series are published as curves rather than a single rating, so we confirm the datasheet numbers for your duty on request.
AirTAC GC600-20 FRL Unit (GC60020MF1WK) Technical Specifications
| Model | AirTAC GC600-20 FRL Unit (GC60020MF1WK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC600-20 FRL Unit (GC60020MF1WK)
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC600-20 FRL Unit (GC60020MF1WK) Is Used
Lab automation air supply
A regulated, filtered and lubricated 3/4 in feed for pneumatic actuators on laboratory or pilot-plant automation, where the fine 5 um element suits sensitive downstream valves.
Fabrication-shop tool ring main
Dropping a conditioned 3/4 in supply off a workshop ring main to feed grinders, drills and air cylinders at heavy-use fabrication benches.
Textile machine pneumatics
Supplying the jets, cylinders and clamps on weaving or spinning machines that need clean, regulated, oil-misted air at a stable pressure.
Is the AirTAC GC600-20 FRL Unit (GC60020MF1WK) the Right Station?
The GC series runs in 200, 300, 400 and 600 sizes; 600 is the largest, with this unit carrying a 3/4 in PT port and 1 in ports available elsewhere in the size. The W code selects the 5 um element over the standard 40 um, and the K code fits a reverse (check) valve; without the K the same unit is ordered as GC60020MF1W. Drain type is a choice: manual (this code) needs an operator to open the bowl, while automatic and differential-pressure drains are separate codes. Gauge codes set the scale: 1 = MPa, 2 = psi, 3 = bar. PT thread is standard; G (BSPP) and NPT are catalogue thread options. Because flow is published as curves, not a single rating, ask us to confirm sizing against your air consumption before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC GC600-20 FRL Unit (GC60020MF1WK) FAQ
AirTAC publishes flow for the GC series as characteristic curves rather than one rated number, so we do not quote a single figure. Send us your air demand and pressure and we will confirm the relevant flow data from the datasheet on request.
Only by the trailing K, which fits a reverse (check) valve in this 600-size, 3/4 in PT, manual-drain F.R.L. The filtration, gauge, thread and drain are identical; for details of the valve itself, ask us for the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC600-20 FRL Unit (GC60020MF1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.