AirTAC GC600-20 FRL Unit (GC60020N)
The AirTAC AirTAC GC600-20 FRL Unit (GC60020N) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT3/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialAluminium alloy
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC600-20 FRL Unit (GC60020N)
GC60020N is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator installed together to clean, regulate and oil-mist lubricate compressed air. This configuration is the size 600 body with a PT3/4 port, standard 40 um filtration and a differential-pressure drain on the filter bowl. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and no gauge is fitted on this code; maximum working pressure is 1.0 MPa (145 psi) with an operating temperature of -5 to 70 C (non-freezing). At size 600 the bowls on the filter and lubricator sections are aluminium alloy.
This is a genuine AirTAC part from the G-series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, plus options for automatic or manual drains, 40 or 5 um filter grades, embedded square or external round gauges (MPa, psi or bar scale), G (BSPP) or NPT threads, and a reverse/check valve. Flow for the series is published as performance curves rather than a single rated figure, so we confirm sizing and full datasheet figures on request.
AirTAC GC600-20 FRL Unit (GC60020N) Technical Specifications
| Model | AirTAC GC600-20 FRL Unit (GC60020N) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC600-20 FRL Unit (GC60020N)
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC600-20 FRL Unit (GC60020N) Is Used
Packaging line carton-sealing cylinders
Feeding filtered, regulated and lubricated air to the pneumatic cylinders that fold and seal cartons on a high-volume packaging conveyor, keeping the actuators sealed and consistent through long production shifts.
CNC machine tool clamping circuits
Supplying prepared air to the pneumatic clamps and tool-change actuators on a machining centre, where a stable regulated pressure protects the clamping sequence and the lubricator mist protects cylinder internals.
Bottling line actuator supply
Conditioning the plant air feeding filler, capper and labeler air cylinders on a beverage bottling line, with the size 600 body matching the larger ports typical of main line drops.
Is the AirTAC GC600-20 FRL Unit (GC60020N) the Right Station?
Size 600 with a 3/4 in PT port is the large end of the G-series; step down to 300/400 sizes if your circuit uses smaller ports, or up to a 1 in port on GC60025 codes. The differential-pressure drain on this code discharges condensate automatically when the pressure differential across the filter is sufficient; if you prefer a fully automatic float drain or a manual drain, other GC codes carry those options. The standard 40 um element suits general plant air; specify the W code for a 5 um element where finer filtration is needed.
PT thread is the standard on this model; G (BSPP) and NPT versions are catalogue options ordered under their own codes. A gauge is not fitted on this N-suffix code, but gauge versions with embedded square or external round gauges in MPa, psi or bar scale exist in the same series. Because flow is published as curves and not a single rating, ask us to confirm the flow for your application against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC GC600-20 FRL Unit (GC60020N) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote one number here. Tell us your line pressure and downstream demand and we will confirm the flow for this unit from the datasheet on request before you order.
The N suffix means no gauge is fitted. The same GC combination is available in gauge versions with an embedded square gauge or an external round gauge, selectable in MPa, psi or bar scale. Ask us to identify the equivalent gauge-equipped code for your size and port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC600-20 FRL Unit (GC60020N)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.