AirTAC GC600-25 FRL Unit (GC60025AC1W)
The AirTAC AirTAC GC600-25 FRL Unit (GC60025AC1W) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC600-25 FRL Unit (GC60025AC1W)
The GC60025AC1W is an AirTAC G-series three-unit F.R.L. combination: separate air filter, pressure regulator and lubricator units assembled as one set for compressed air. This configuration is size 600 with PT 1 inch ports, an automatic drain on the filter bowl, a 5 um filter element and a round external gauge scaled in MPa. The regulator adjusts 0.15-0.9 MPa (20-130 psi) with this drain type, maximum inlet pressure is 1.0 MPa (145 psi), the aluminum alloy bowls suit the large 600 frame, and working temperature is -5 to 70 C.
This is a genuine AirTAC part. The G series runs from size 200 to 600 with ports from 1/8 to 1 inch, and this set can be ordered with the standard 40 um element, a manual or differential-pressure drain, a psi or bar gauge scale, G (BSPP) or NPT threads in place of the PT standard, or a fitted reverse (check) valve. AirTAC publishes 600-size flow as curves rather than one rated figure; ask us to confirm the datasheet numbers for your application before ordering.
AirTAC GC600-25 FRL Unit (GC60025AC1W) Technical Specifications
| Model | AirTAC GC600-25 FRL Unit (GC60025AC1W) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC600-25 FRL Unit (GC60025AC1W)
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC600-25 FRL Unit (GC60025AC1W) Is Used
CNC machining centers
Prepares air for tool-changer and clamp cylinders on a CNC machining center, with the 5 um element filtering finer particulate than the standard grade.
Paint finishing booths
Delivers clean, lubricated and pressure-steady air to spray guns and masking actuators on a paint finishing line, where fine filtration supports finish quality.
Electronics assembly stations
Feeds pick-and-place and press-fit modules on an electronics assembly line, with automatic drain limiting manual attention across shifts.
Is the AirTAC GC600-25 FRL Unit (GC60025AC1W) the Right Station?
Size 600 with a 1 inch port is the largest step in the G series; step down to 400, 300 or 200 (3/4 to 1/8 inch) when your circuit uses less air. Drain choices are differential-pressure (default), automatic (this model) and manual; automatic suits installations that run unattended. The 5 um W element is the finer option against the 40 um standard. Gauge here is a round external gauge reading in MPa; psi or bar scales and the embedded square gauge are alternatives, and the K option adds a reverse (check) valve. Threads: PT is the standard, with G (BSPP) and NPT as orderable options. Flow is published as curves, not one rated number, so send us your flow demand and working pressure and we will confirm sizing from the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC GC600-25 FRL Unit (GC60025AC1W) FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so there is no one rated number we can quote. Send us your required flow and working pressure and we will confirm the datasheet curve values for this 600-size set on request, and check whether a smaller size would suit the application.
W selects the 5 um filter element, the finer of the two published grades; without W the set uses the 40 um standard element. The rest of the code decodes as size 600, PT 1 inch ports, automatic drain (A) and a round external gauge scaled in MPa (C1).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC600-25 FRL Unit (GC60025AC1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.