AirTAC GC600-25 FRL Unit (GC60025AF1)
The AirTAC AirTAC GC600-25 FRL Unit (GC60025AF1) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC600-25 FRL Unit (GC60025AF1)
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator supplied as one matched set. This GC60025AF1 is the largest 600 size, fitted with PT1" ports for high-flow compressed-air supply lines. The filter bowl drains automatically, the regulator carries a square gauge reading in MPa, and the element is the standard 40 um grade. It is for compressed air only, rated up to 1.0 MPa (145 psi) maximum working pressure, with an operating temperature of -5 to 70 C (non-freezing). The regulator covers 0.15-0.9 MPa (20-130 psi) with automatic drain, and the 600-size bowls are aluminium alloy.
This is a genuine AirTAC part. The G series comes in 200, 300, 400 and 600 sizes with a choice of PT, G (BSPP) or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um (W) filtration, and square or round gauges in MPa, psi or bar scales. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and the full datasheet for your application.
AirTAC GC600-25 FRL Unit (GC60025AF1) Technical Specifications
| Model | AirTAC GC600-25 FRL Unit (GC60025AF1) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC600-25 FRL Unit (GC60025AF1)
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC600-25 FRL Unit (GC60025AF1) Is Used
Injection moulding machine service
Conditioning the compressed air feeding core-pull and ejection cylinders on an injection moulding machine, with automatic draining and an MPa gauge matching the machine-side pressure readouts.
Packaging machinery air drops
Feeding case packers and carton sealers from a main line drop - filter, regulation and lubrication in one set for the actuators and gripper cylinders that cycle throughout the shift.
Automotive assembly air tools
Supplying regulated, lubricated air to impact wrenches and nutrunners at a final-assembly station, where the automatic drain handles line condensate between maintenance rounds.
Is the AirTAC GC600-25 FRL Unit (GC60025AF1) the Right Station?
Size 600 is the largest step in the G series - choose it for 1 in. porting at the top of the range, or step down to 400, 300 or 200 for smaller lines. Drain options are differential-pressure (default), automatic and manual; this unit has automatic drain, which suits unmanned plant. Element grade is the standard 40 um, with the 5 um (W) variant available if finer filtration is needed. Gauge here is the square type with an MPa scale; round gauges in bar or psi are catalogue alternatives.
Thread is PT as standard; G (BSPP) and NPT are catalogue options to order. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC GC600-25 FRL Unit (GC60025AF1) FAQ
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so no one number is quoted here. Send us your line pressure and expected demand and we will confirm sizing from the datasheet on request.
Automatic drain expels collected condensate from the filter bowl without operator attention, while manual drain requires a periodic bowl check. Manual-drain sets carry a wider regulator adjustment of 0.05-0.9 MPa (7-130 psi); automatic and differential-pressure drains are 0.15-0.9 MPa (20-130 psi). We will confirm the variant you need on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC600-25 FRL Unit (GC60025AF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.