The AirTAC AirTAC GC200-06MC2WGK F.R.L. Combo, G1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built up as one unit, so the air is cleaned, pressure-stabilised and lubricated in a single installation. This GC200-06MC2WGK is the size 200 version with a G1/8 (1/8 in) port, 5 um filtration (the W grade, finer than the 40 um standard), a manual drain on the filter bowl, a round pressure gauge reading in psi, a reverse/check valve fitted, and the mounting bracket included. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the bowls on this size are PC (polycarbonate).
It is a genuine AirTAC part. The GC range spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, plus drain, filter-grade, gauge-scale and thread options, and a maximum working (inlet) pressure of 1.0 MPa (145 psi). Operating temperature for this unit is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | AirTAC GC200-06MC2WGK F.R.L. Combo, G1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Air cylinders on a small pneumatic clamping fixture draw filtered, regulated and lubricated air at a set pressure, keeping clamp force consistent through a shift while the 5 um element keeps fine particulate out of the valve stack.
On a pneumatic test bench, the 5 um element protects sensitive instruments from water and particulate carryover, the regulator holds the set test pressure, and the lubricator conditions the downstream cylinders doing the cycling.
Sealing jaws and product-push cylinders on a small carton-sealing machine run from one conditioned supply: clean, pressure-stable and oil-misted air, with the manual drain emptied as part of the operator's routine checks.
The real choices in this family are the size and port step (200/300/400/600, 1/8 in to 1 in) against the flow your line needs; the drain type on the filter bowl (differential-pressure as standard, automatic, or manual as here); the filter grade (40 um standard, 5 um with the W code); the gauge (embedded square as standard, external round optional, with MPa, psi or bar scales); the thread (PT is the standard, G and NPT are order options); and the bracket. With the manual drain fitted, the regulation range is 0.05-0.9 MPa (7-130 psi). Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
Flow for the GC200 is published as curves, not a single rated figure, so we do not quote a number here. Tell us your port size, working pressure and downstream demand, and we will confirm the sizing from the AirTAC datasheet on request.
The GC filter stage takes a 40 um element as standard and a 5 um element with the W code, as fitted here. Choose 5 um where downstream valves, cylinders or instruments are sensitive to finer particulate and water; 40 um suits general plant air. Because this unit has a manual drain, the filter bowl must be drained by hand as part of routine maintenance rather than discharging automatically.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.