The AirTAC AirTAC GC20006F2WGK F.R.L. G1/8, 5 um, psi Gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This GC20006F2WGK is the size 200 set with a G1/8 port, a 5 um filter element (code W) with differential-pressure drain, a standard regulator adjustable from 0.15 to 0.9 MPa (20-130 psi), an embedded square gauge reading in psi, and a reverse/check valve fitted. Bowls on the size 200 filter and lubricator are polycarbonate, and the set is rated to 1.0 MPa (145 psi) maximum inlet pressure at -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and options include 40 um or 5 um filtration, automatic, manual or differential-pressure drains, MPa, psi or bar gauge scales, and PT, G or NPT threads. Rated flow for this combination is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | AirTAC GC20006F2WGK F.R.L. G1/8, 5 um, psi Gauge |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and oil-misted air feeding tool-clamp and pallet-change cylinders on a small CNC cell, with the 5 um element protecting precision valves from fine particulate.
Supplying stopper and pusher cylinders on a carton packaging conveyor, where the regulator holds a steady setting and the lubricator feeds mist oil to the actuators.
Air preparation for pick-and-place grippers and capping heads on a bottling line, with the fitted check valve holding the circuit against back-feed.
Step up through the size codes (200, 300, 400, 600) as your port and air demand grow - the port here is G1/8, and G (BSPP) is ordered as an option against the PT standard, with NPT also available. Choose the drain to match your maintenance routine: differential-pressure (this unit), automatic for unattended draining, or manual. Filtration is 40 um as standard; the W code on this model selects the finer 5 um element where downstream valves and cylinders need cleaner air. The square gauge is fitted reading psi, with MPa and bar scales and an external round gauge as alternatives, and a mounting bracket is included. Because rated flow is published as curves rather than one number, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
Rated flow for this combination is published as performance curves rather than a single rated figure, so we do not quote a number here. Tell us your working pressure and air demand and we will confirm the flow from the AirTAC datasheet on request.
The standard element filters to 40 um, which suits general supply. The W code on this model selects the 5 um element, the finer choice where downstream valves, cylinders or instruments are sensitive to fine particulate. Both grades remove water and particulate; neither changes the regulator or lubricator function.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.