The AirTAC AirTAC GC20008F2WG F.R.L. Combination G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200 is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This GC20008F2WG is built with a G1/4 port, a 5 um filter element (code W), a differential-pressure drain on the filter bowl, a standard regulator covering 0.15-0.9 MPa (20-130 psi), and an embedded square gauge reading in psi. The bowls on this 200 size are polycarbonate (only size 600 uses aluminium alloy), maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), no reverse (check) valve is fitted, and a mounting bracket is included.
This is a genuine AirTAC part, available across the G-series size range with ports from 1/8 to 1 inch and thread choices of PT (the standard), G or NPT as order options. Flow for the GC series is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | AirTAC GC20008F2WG F.R.L. Combination G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds spray guns on a body-shop paint line: the 5 um element helps keep water and particulate out of the finish while the regulator holds the set pressure and the lubricator mists the gun and air motor downstream.
Prepares air for clamps, tool-change cylinders and blow-off nozzles on a CNC cell, with the square psi gauge letting the operator verify the set pressure at the drop.
Supplies treated air to diverters, grippers and sealing heads on a packaging conveyor, with filtered, regulated and lubricated air protecting the cylinders and valves along the line.
Step the size to match the job: GC200 carries a 1/4 port here, while GC300, GC400 and GC600 move up to larger ports and higher flow. The decodable choices on this unit are: filter grade 5 um (W) instead of the 40 um standard; drain type differential-pressure on the filter (automatic and manual drains are order options); gauge scale psi (MPa or bar scales are available); and thread G here, where PT is the standard and NPT is orderable. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow curve and datasheet figures on request.
The W in the code selects the 5 um element; the GC series standard is 40 um. Both grades are catalogue options, so order the one that matches how clean your downstream equipment needs the air to be.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.