The AirTAC AirTAC GC60020C2WGK F.R.L. Unit, G3/4, 5 um Filter is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This GC60020C2WGK is the size 600 unit with a G3/4 port. The filter stage carries a 5 um element (the finer of the two published grades) with a differential-pressure drain, and the bowls on this size are aluminium alloy. The regulator is the standard type, adjustable from 0.15 to 0.9 MPa (20-130 psi), and a round gauge with a psi scale is fitted. A reverse/check valve is fitted and the set includes a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC range is published in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and with choices of drain type, filter grade, gauge style and scale, thread (PT standard, G and NPT to order) and reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | AirTAC GC60020C2WGK F.R.L. Unit, G3/4, 5 um Filter |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for a machining centre supply line feeding pneumatic clamps, tool-change cylinders and chip-clearing jets.
Point-of-entry air preparation for a bottling or packaging hall, supplying the actuators and grippers on filling, capping and case-packing machines.
Air preparation at the drop for paint-shop tooling and air-assisted equipment, with the 5 um element catching finer particulate ahead of the line.
Size and port are the first choice: the GC range steps through 200, 300, 400 and 600 with increasing port size, and this unit sits at the top of the range with a 3/4 inch port. Because flow is published as curves rather than a single rating, send us your air demand and we will confirm the right size before you order. The other decodable choices are: drain type (differential-pressure as here, automatic, or manual); filter grade (40 um standard, 5 um with code W, as fitted here); gauge style and scale (embedded square or external round, in MPa, psi or bar - this unit has a round psi gauge); thread (PT is the standard, G and NPT are order options); and the reverse/check valve. Ask us to confirm sizing against the application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC range as curves, not as a single rated figure, so we do not quote a number here. Tell us your operating pressure and air demand and we will confirm the flow and datasheet figures for this exact unit on request.
The W in the code specifies the 5 um element, the finer of the two published grades; the standard element is 40 um. Both grades are catalogue options across the GC sizes, so the same combination can be ordered with the standard 40 um grade if your application does not need the finer filtration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.