The AirTAC AirTAC GC60025LC2WG F.R.L. Combination, G1 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025LC2WG is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, each doing its own job on one air line. This 600-size unit is built around a G1 (1 in) port with G thread, carries the W-coded 5 um filter element in place of the standard 40 um, drains its bowl by differential pressure, and is fitted with a round gauge reading in psi. The regulator is the L-coded low-pressure type, the 600-size bowl is aluminium alloy, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with a choice of ports, drain types, filter grades, gauge styles and scales, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | AirTAC GC60025LC2WG F.R.L. Combination, G1 Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed where the main supply enters a packaging line, it removes water and particles, holds a steady low set pressure and feeds oil mist to the line's cylinders and valves.
Feeds pneumatic clamps and workholding fixtures on a machining centre, giving filtered, regulated and lubricated air so clamping cylinders cycle cleanly shift after shift.
Mounted at the drop feeding air-driven conveyor actuators and diverters, keeping moisture and debris out of the valves while the lubricator mists oil to the moving seals.
Start with size and port: the 200, 300, 400 and 600 sizes step up in port and flow capacity, and this unit sits at the top with a G1 (1 in) G-thread port - match it to the line size your flow requires. Choose the drain: differential-pressure (as fitted here), automatic or manual. Choose the filter grade: 40 um standard, or the 5 um W element fitted here for finer filtration upstream of sensitive equipment. Choose the gauge: embedded square or external round, in MPa, psi or bar scales - this unit has a round psi gauge. The regulator here is the L-coded low-pressure type; its exact adjustment range is not published, so confirm it with us. Thread is PT as standard, with G and NPT as order options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
Flow for the GC600 series is published as curves rather than a single rated figure, so we do not quote one number. Send us your application details and we will confirm the flow and sizing from the AirTAC datasheet on request.
L marks the low-pressure regulator type. It is intended for circuits that run at lower set pressures than the standard regulator; the exact adjustment range for this type is not published, so confirm it with us before ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.