AirTAC GFC200-06 Combination Unit (GFC20006MLF1W)
The AirTAC AirTAC GFC200-06 Combination Unit (GFC20006MLF1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/8" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-06 Combination Unit (GFC20006MLF1W)
The AirTAC GFC series is a two-piece set combining a filter-regulator and a lubricator: it strips water and particulate from compressed air, holds a stable downstream pressure and adds a metered oil mist for tools and actuators. This GFC20006MLF1W is the 200 size with PT1/8 standard ports, a manual drain on the polycarbonate filter bowl, the low-pressure type regulator with a 0.05-0.9 MPa (7-130 psi) adjustment span, the embedded square MPa gauge and the finer 5 um filtration element in place of the 40 um standard. Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G series spans 200 to 600 sizes with ports from 1/8 to 1 inch, with options for drain type, filtration grade, gauge scale and G (BSPP) or NPT thread against the PT standard. Flow is published as curves rather than a single rated number, so we confirm datasheet and sizing figures on request.
AirTAC GFC200-06 Combination Unit (GFC20006MLF1W) Technical Specifications
| Model | AirTAC GFC200-06 Combination Unit (GFC20006MLF1W) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-06 Combination Unit (GFC20006MLF1W)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-06 filter regulator and GL200-06 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-06 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-06 Combination Unit (GFC20006MLF1W) Is Used
Ejector and core-pull air on an injection moulding machine
Treat the air feeding ejector and core-pull cylinders on a moulding press, with the low-pressure type regulator set to a moderate pressure and the 5 um element protecting the machine's valves.
Electronics assembly fixture clamps
Supply small clamping cylinders on an electronics assembly fixture with clean, regulated, lubricated air, where the square gauge sits flush on the control panel for easy checks.
Diverter and stopper cylinders on a distribution conveyor
Condition the air to diverters, stoppers and pushers along a sortation conveyor, with hand-draining of the bowl worked into the line's daily maintenance routine.
Is the AirTAC GFC200-06 Combination Unit (GFC20006MLF1W) the Right Set?
The 200 size with PT1/8 ports is the smallest step of the G series; choose 300/400/600 as port and flow needs grow. The W suffix selects the 5 um element over the 40 um standard for finer particulate removal. Manual drain fits attended points of use where the bowl is drained by hand; automatic and differential-pressure drain codes cover unattended installations. The embedded square gauge here reads in MPa (scale 1); a round external gauge or psi/bar scales are alternative codes. PT thread is standard, with G (BSPP) and NPT as catalogue options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-06 filter regulator on its own.
AirTAC GFC200-06 Combination Unit (GFC20006MLF1W) FAQ
AirTAC publishes flow for this series as capacity curves, not as a single rated figure, so there is no one number to quote here. Give us your supply pressure, set pressure and downstream equipment demand and we will confirm the sizing from the datasheet on request.
The W in GFC20006MLF1W selects the 5 um filtration element, the finer choice when downstream valves, cylinders or processes are sensitive to fine particles. The standard element is 40 um. Drain type (manual here), gauge style and scale, and thread (PT standard, with G and NPT options) are the other decode choices to settle before ordering.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-06 Combination Unit (GFC20006MLF1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.