AirTAC GFC200-06 Combination Unit (GFC20006MNW)
The AirTAC AirTAC GFC200-06 Combination Unit (GFC20006MNW) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/8" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-06 Combination Unit (GFC20006MNW)
The AirTAC GFC series is a two-unit air preparation set: a filter regulator plus a lubricator, giving filtration, pressure regulation and oil-mist lubrication in one station. This GFC20006MNW is the 200 size with PT 1/8 ports, a manual drain on the filter bowl, a 5 um filter element and no gauge fitted. The manual drain means water is emptied from the bowl by hand, and the 5 um element captures finer particulate than the standard 40 um grade. Downstream pressure is set on the regulator within the manual-drain range of 0.05-0.9 MPa (7-130 psi), with a maximum working pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part. The G series comes in 200, 300, 400 and 600 sizes with ports from 1/8" to 1", 40 um standard or 5 um (W) filter grades, differential-pressure, automatic or manual drains, gauge options, and PT, G or NPT threads. Working temperature is -5 to 70 C (non-freezing) and the 200-size bowls are polycarbonate. Flow is published as curves rather than a single rating, so we confirm datasheet and flow figures for your circuit on request.
AirTAC GFC200-06 Combination Unit (GFC20006MNW) Technical Specifications
| Model | AirTAC GFC200-06 Combination Unit (GFC20006MNW) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-06 Combination Unit (GFC20006MNW)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-06 filter regulator and GL200-06 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-06 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-06 Combination Unit (GFC20006MNW) Is Used
CNC tool-clamping circuits
On a machining center, tool-clamp cylinders and swing-arm actuators need clean, regulated, lubricated air; this set filters to 5 um, holds the set pressure and meters oil mist to the directional valves.
Packaging line gate cylinders
On a cartoning or case-packing conveyor, gate and pusher cylinders run thousands of cycles per shift; the filter regulator protects the valves and the lubricator keeps cylinder seals conditioned.
Refinish booth spray-gun supply
At an automotive refinish booth, spray guns want fine-filtered, regulated, lubricated air at the gun station; the 5 um element and oil misting suit gun and cup feeds at a bench drop.
Is the AirTAC GFC200-06 Combination Unit (GFC20006MNW) the Right Set?
Step up from 200 to 300, 400 or 600 when your circuit needs larger ports and more flow; this 200 size with PT 1/8 ports suits compact circuits. Choose the manual drain (M) when an operator can empty the bowl as part of routine checks, or specify automatic (A) or the default differential-pressure drain for hands-off water removal. The W code gives the 5 um element; drop it for the standard 40 um. The N code means no gauge is fitted - other variants carry the embedded square gauge or an external round gauge with MPa, psi or bar scale. PT thread is the standard here; G (BSPP) and NPT are catalogue options to order. Flow for this series is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-06 filter regulator on its own.
AirTAC GFC200-06 Combination Unit (GFC20006MNW) FAQ
AirTAC publishes flow for the G series as characteristic curves, not as a single rated figure, so we do not quote a number here. Ask us and we will confirm the datasheet curve and check whether the 200 size with PT 1/8 ports matches your application before you order.
The M in the code means the filter bowl is emptied by hand; the default differential-pressure drain and the automatic (A) drain are available in the same size. The N in the code specifies that no gauge is fitted - variants with an embedded square gauge or an external round gauge in MPa, psi or bar scale can be ordered.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-06 Combination Unit (GFC20006MNW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.