AirTAC GFC200-06 Combination Unit (GFC20006NK)
The AirTAC AirTAC GFC200-06 Combination Unit (GFC20006NK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/8" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-06 Combination Unit (GFC20006NK)
The AirTAC GFC series is a two-unit air preparation set: a filter regulator plus a lubricator, giving filtration, pressure regulation and oil-mist lubrication in one station. This GFC20006NK is the 200 size with PT 1/8 ports, the default differential-pressure drain on the filter bowl, the standard 40 um filter element, no gauge fitted, and a reverse (check) valve specified by the trailing K. Downstream pressure is set on the regulator within the differential-drain range of 0.15-0.9 MPa (20-130 psi), with a maximum working pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part. The G series comes in 200, 300, 400 and 600 sizes with ports from 1/8" to 1", 40 um standard or 5 um (W) filter grades, differential-pressure, automatic or manual drains, gauge options, and PT, G or NPT threads. Working temperature is -5 to 70 C (non-freezing) and the 200-size bowls are polycarbonate. Flow is published as curves rather than a single rating, so we confirm datasheet and flow figures for your circuit on request.
AirTAC GFC200-06 Combination Unit (GFC20006NK) Technical Specifications
| Model | AirTAC GFC200-06 Combination Unit (GFC20006NK) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-06 Combination Unit (GFC20006NK)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-06 filter regulator and GL200-06 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-06 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-06 Combination Unit (GFC20006NK) Is Used
Palletizer gripper supply
On a robotic palletizer, gripper and clamp actuators are fed from a conditioned branch; this set filters to 40 um, regulates the working pressure and lubricates the actuators, with the check valve specified for circuits where reverse flow must be prevented.
Automotive assembly air-tool stations
At an automotive assembly line tool station, the set conditions the drop feeding impact drivers and nutrunners: regulated pressure, clean air for the tool valves and oil mist for the motor.
Canning line conveyor stops
On a canning or filling line, conveyor stops and diverters run on small cylinders fed from this set; the lubricator keeps the valves and cylinders conditioned through continuous shift running.
Is the AirTAC GFC200-06 Combination Unit (GFC20006NK) the Right Set?
Use this base-plus-check-valve build of the 200-size two-unit set where the circuit calls for a reverse (check) valve with the unit; the same code without the K omits it. Size up to 300, 400 or 600 when the branch needs larger ports and more flow than PT 1/8. This code keeps the standard 40 um element and the default differential-pressure drain; add W for 5 um filtration, or M/A for manual or automatic drainage, and pick a gauge variant (embedded square or external round, MPa/psi/bar scale) if a readout is needed. PT is the standard thread, with G (BSPP) and NPT as catalogue options. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-06 filter regulator on its own.
AirTAC GFC200-06 Combination Unit (GFC20006NK) FAQ
AirTAC publishes flow for the G series as characteristic curves rather than a single rated figure, so we do not quote a rated number. Ask us and we will confirm the datasheet curve and check the 200 size with PT 1/8 ports against your application before ordering.
The trailing K adds a reverse (check) valve fitted with the unit; the plain GFC20006N has none. Both are the 200 size with PT 1/8 ports, default differential-pressure drain, 40 um element and no gauge. For finer filtration choose the W variant, and for a pressure readout choose a code with the square or round gauge option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-06 Combination Unit (GFC20006NK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.