AirTAC GFC200-08 Combination Unit (GFC20008C1W)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008C1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008C1W)
The AirTAC GFC series combines a filter-regulator and a lubricator as a two-piece set: the air is filtered, the working pressure is regulated, and oil mist is added for downstream tooling. This 200-size configuration has a 1/4 in PT port, a differential-pressure drain on the filter bowl, a fine 5 um filter element and a round external gauge scaled in MPa. With the differential-pressure drain the regulator adjusts from 0.15-0.9 MPa (20-130 psi), and maximum working pressure is 1.0 MPa (145 psi) for compressed air only.
This is a genuine AirTAC part. The G series is offered in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, PT standard thread with G(BSPP) and NPT as catalogue options, automatic or manual drain variants, 40 um and 5 um filter grades, and MPa, psi or bar gauge scales. Because AirTAC publishes flow as curves rather than a single rating, we confirm flow and other datasheet figures for GFC20008C1W on request.
AirTAC GFC200-08 Combination Unit (GFC20008C1W) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008C1W) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008C1W)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008C1W) Is Used
CNC machining centre air supply
Fitted ahead of a CNC machining centre's pneumatic circuit, the set removes condensate and fine particulate, holds a steady regulated pressure, and meters oil mist to tool-change cylinders and clamps so they keep cycling cleanly through the shift.
Packaging line cylinder feed
On a carton-forming and sealing line, the unit conditions the supply feeding the sealing jaws and pusher cylinders: filtered 5 um air, a set working pressure, and consistent lubrication for the cylinders that handle thousands of cycles per day.
Maintenance shop tool stations
Installed at a workshop air drop, it gives technicians filtered, regulated and lubricated air for impact wrenches, riveters and air ratchets, with the MPa gauge giving a quick visual check that the line is at the set pressure.
Is the AirTAC GFC200-08 Combination Unit (GFC20008C1W) the Right Set?
Choose the 200 size when your circuit runs modest volumes through a 1/4 in line; stepping up to 300, 400 or 600 gives larger ports and more flow capacity, shown by the published curves rather than one number. This code uses the differential-pressure drain, which works without daily attention; automatic (A) or manual (M) drain versions are ordered by code if your maintenance routine prefers them. The W in the code fits the finer 5 um element, suited to applications that need cleaner air than the standard 40 um grade. Gauge preference is ordered by code as well: this unit carries a round external gauge scaled in MPa, with psi (C2) and bar (C3) alternatives, and the thread is PT with G and NPT available. Send us your flow curve requirements and we will confirm sizing before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008C1W) FAQ
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote a number. Tell us your line pressure and expected air demand and we will confirm the flow figures from the datasheet on request before you order.
C1 orders the round external gauge with an MPa scale. C2 gives the same round gauge in psi and C3 in bar; a code without a C/F gauge digit instead carries the embedded square gauge. All are catalogue options on the same GFC200 two-unit set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008C1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.