AirTAC GFC200-08 Combination Unit (GFC20008C2W)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008C2W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008C2W)
The AirTAC GFC series brings a filter-regulator and a lubricator together as a two-piece set: air is filtered, pressure is regulated and oil mist is fed to downstream equipment. This 200-size configuration carries a 1/4 in PT port, a differential-pressure drain on the filter bowl, a fine 5 um filter element and a round external gauge scaled in psi - a familiar readout for US gauge panels. With the differential-pressure drain the regulator adjusts from 0.15-0.9 MPa (20-130 psi), and maximum working pressure is 1.0 MPa (145 psi) for compressed air.
This is a genuine AirTAC part. The G series comes in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, PT thread standard with G(BSPP) and NPT as catalogue options, automatic or manual drains, 40 um and 5 um filter grades, and MPa, psi or bar gauge scales. AirTAC publishes flow as curves rather than a single rating, so we confirm flow and datasheet figures for GFC20008C2W on request.
AirTAC GFC200-08 Combination Unit (GFC20008C2W) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008C2W) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008C2W)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008C2W) Is Used
Automated assembly cell actuation
Installed at the air inlet of an automated assembly cell, the set strips condensate and fine particles, sets the working pressure the pick-and-place cylinders need, and meters lubricant to the actuators that cycle continuously on the line.
Laboratory instrument air feed
Fitted on the supply to lab bench instrumentation and pneumatic test rigs, it delivers 5 um filtered, pressure-regulated and lubricated air, with the psi gauge giving technicians a direct reading against their test setpoints.
Bottling line diverters and stoppers
On a bottling line, the unit conditions the air feeding bottle stopper and diverter cylinders: clean 5 um air, a stable regulated pressure, and oil mist so the high-cycle cylinders keep running smoothly across long production runs.
Is the AirTAC GFC200-08 Combination Unit (GFC20008C2W) the Right Set?
The 200 size suits 1/4 in circuits with modest volumes; 300, 400 and 600 sizes offer larger ports and greater flow capacity, shown by the published curves rather than a single figure. Drain here is differential-pressure, which runs without routine attention; automatic (A) and manual (M) drain variants are ordered by code. The W code selects the finer 5 um element instead of the standard 40 um grade where cleaner air matters. This code's C2 gauge digit orders the round external gauge in psi; MPa (C1) and bar (C3) scales are available the same way, and the thread is PT with G and NPT offered as catalogue options. Send us your application details and we will confirm the flow curve fit before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008C2W) FAQ
Flow for the AirTAC G series is published as curves, not as a single rated figure, so we do not quote a number. Give us your line pressure and expected demand and we will confirm the flow figures from the datasheet on request before ordering.
The standard G-series filter grade is 40 um, which handles general plant air. The W in this code selects the finer 5 um element for applications that need cleaner air, such as instrumentation and precision actuation. Both grades fit the same 200-size filter-regulator body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008C2W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.