AirTAC GFC200-08 Combination Unit (GFC20008F1)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008F1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008F1)
The AirTAC GFC20008F1 is a two-unit air-treatment set that combines a filter regulator and a separate lubricator in one matched pair, so the air is filtered, regulated and then oil-mist lubricated before it reaches your actuators. This 200-size configuration is specified for 1/4 inch PT ports. The filter bowl uses the default differential-pressure drain, the element is the standard 40 um grade, and the regulator is the standard type with the embedded square gauge reading in MPa.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600 with a choice of ports, thread options, drain types and 40 um or 5 um elements. Max working pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and the PC bowl suits this size. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008F1) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008F1) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008F1)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008F1) Is Used
Packaging machine valve island
Feeds clean, regulated, lubricated air to the directional valves and cylinders of a cartoning or case-packing machine, with the lubricator keeping downstream sealing parts misted for long shift running.
Pneumatic clamping fixture
Supplies a workholding clamp circuit on a machining fixture, where the regulator holds steady clamp pressure and the filter removes water and particulate before the air reaches the clamping cylinders.
Conveyor diverters and stoppers
Prepares the air supply for pop-up diverters, stoppers and pushers on a sortation conveyor, conditioning the air once at the drop and feeding the whole control group downstream.
Is the AirTAC GFC200-08 Combination Unit (GFC20008F1) the Right Set?
Start by matching the 200 size and its 1/4 inch port to your line demand - larger 300/400/600 sizes give larger ports and more flow. Choose the drain style for the filter bowl: differential-pressure (this model), automatic (A) for unattended draining, or manual (M) where you drain on a schedule. Pick the element grade: 40 um standard here, or W for 5 um finer filtration. The regulator covers 0.15-0.9 MPa (20-130 psi) with this differential-pressure drain, and the F1 code gives the embedded square gauge in MPa - other gauge scales and styles are available. Thread is PT as standard; G (BSPP) and NPT are catalogue options. Add K if you want a reverse/check valve fitted.
Because flow is published as curves and not a single rated number, ask us to confirm sizing against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008F1) FAQ
AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not quote a number. Tell us your application and we will confirm the datasheet and flow curve for this 200-size set on request, including how it compares with the 300, 400 and 600 sizes.
F1 is the gauge code: an embedded square gauge with an MPa scale. The 20008 part of the code sets the 200 size and 1/4 inch PT port, and this version uses the default differential-pressure drain with a 40 um element. You can order automatic drain (A), manual drain (M), a 5 um element (W), other gauge scales, or a reverse/check valve (K) - ask us for the exact variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008F1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.