AirTAC GFC200-08 Combination Unit (GFC20008F1W)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008F1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008F1W)
The AirTAC GFC20008F1W is a two-unit air-treatment set pairing a filter regulator with a separate lubricator, fitted with the W code 5 um filter element for finer particulate removal than the standard 40 um grade. This 200-size unit is specified for 1/4 inch PT ports, uses the default differential-pressure drain on the PC filter bowl, regulates via the standard type with the embedded square gauge reading in MPa, and then oil-mist lubricates the downstream air.
This is a genuine AirTAC part. The G series two-unit sets come in sizes 200, 300, 400 and 600 with drain, element, gauge and thread options. Max working pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and the regulator range with this differential-pressure drain is 0.15-0.9 MPa (20-130 psi). Flow is published as curves, so we confirm the datasheet figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008F1W) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008F1W) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008F1W)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008F1W) Is Used
Lab automation air supply
Conditions the air feeding pipettes, valves and small actuators on laboratory automation equipment, where the 5 um element keeps finer particulate out of sensitive pneumatic components.
Electronics assembly pick-and-place
Feeds the vacuum ejectors and gripper cylinders of an SMT or electronics assembly line, combining fine filtration, stable regulated pressure and oil mist for the actuators in one two-unit set.
Air bearing and low-friction actuator feed
Prepares supply air for low-friction pneumatic slides and air-driven spindles on light-duty automation, where a 5 um element upstream helps protect close-tolerance moving parts.
Is the AirTAC GFC200-08 Combination Unit (GFC20008F1W) the Right Set?
Choose this W code when your valves or instruments need finer filtration: the 5 um element removes finer particulate than the standard 40 um. The 200 size with 1/4 inch PT port suits lighter line duties - step to 300/400/600 for larger ports and flow. Drain is differential-pressure here; pick A for automatic or M for manual (manual widens the regulator range to 0.05-0.9 MPa / 7-130 psi). The F1 gauge is the embedded square type in MPa - alternative scales are available. Thread is PT as standard, with G (BSPP) and NPT as catalogue options, and K can be added if you want a reverse/check valve.
Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008F1W) FAQ
AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not state a number or a percentage. We will confirm the datasheet and the flow curves for this 200-size, 1/4 inch port set on request so you can size it against your line demand.
Pick W when the downstream equipment - precision valves, instruments, ejectors or close-tolerance actuators - needs finer particulate removal than general plant air. The rest of the code stays the same: 200 size, 1/4 inch PT port, differential-pressure drain, embedded square MPa gauge, and an optional K check valve if you need one.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008F1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.