AirTAC GFC200-08 Combination Unit (GFC20008LF2)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008LF2) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008LF2)
The AirTAC GFC series combines a filter-regulator and a lubricator in a two-piece set, so filtration, pressure regulation and oil-mist lubrication of compressed air come in a single order. This GFC20008LF2 is the 200 size with PT1/4 ports, the standard 40 um filter element, a differential-pressure drain on the bowl and the L low-pressure regulator type, with an embedded square gauge scaled in psi. Both bowls on this 200-size set are polycarbonate.
This is a genuine AirTAC part. The G series is built in 200, 300, 400 and 600 sizes, with PT as the standard thread and G (BSPP) or NPT available as catalogue options, automatic, manual or differential-pressure drains, and 40 um standard or 5 um (W) filtration. Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so we confirm datasheet and sizing numbers on request.
AirTAC GFC200-08 Combination Unit (GFC20008LF2) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008LF2) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008LF2)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008LF2) Is Used
Trailer assembly plant
A line-side set feeding impact wrenches and air ratchets on a trailer axle and decking line, with the psi-scaled gauge reading the way US shop crews set their tools.
Machining fixture clamping
Supplies filtered, regulated, lubricated air to the swing clamps and vises on a machining cell fixture, holding a consistent clamp pressure part to part.
Palletizer end-of-arm tooling
Mounted near the gripper manifold of a robotic palletizer to deliver clean, pressure-set, oil-misted air to the suction and clamp actuator circuit.
Is the AirTAC GFC200-08 Combination Unit (GFC20008LF2) the Right Set?
Pick the 200, 300, 400 or 600 size to match your port and demand; this 200 set uses 1/4 inch PT ports as standard, with G and NPT threads orderable. Filtration here is the 40 um standard grade; choose the W option for 5 um where finer air is required. The differential-pressure bowl drains as pressure drops, while automatic (A) and manual (M) drains are orderable alternatives. Gauge scales can be specified as 1 (MPa), 2 (psi, as on this unit) or 3 (bar). Standard GFC regulators with a differential-pressure drain adjust from 0.15 to 0.9 MPa (20-130 psi); this is the L low-pressure type, so please confirm its exact setting range with us before ordering. Flow is published as curves, not a single rating, so ask us to confirm sizing against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008LF2) FAQ
Flow for the G series is published as curves rather than a single rated figure, so we do not quote one number here. Share your line pressure and air demand and we will confirm the sizing from the datasheet on request.
It means an embedded square gauge scaled in psi (scale 2). Alternatives in the same family are scale 1 (MPa) or scale 3 (bar), and a round external gauge is also an option on units with a regulator. Tell us which scale and style your operators prefer.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008LF2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.