AirTAC GFC200-08 Combination Unit (GFC20008LNW)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008LNW) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008LNW)
GFC20008LNW is a genuine AirTAC G-series two-unit set: a filter-regulator plus a separate lubricator, delivering filtered, regulated and lubricated compressed air in one assembly. This configuration is size 200 with a PT1/4 port, carries the fine 5 um filter element (W), drains condensate by differential pressure, is the low-pressure regulator type, and has no gauge fitted. Both bowls are polycarbonate. Medium is compressed air only, maximum working pressure is 1.0 MPa (145 psi), and operating temperature is -5 to 70 C, non-freezing. With differential-pressure draining, the regulator adjust range is 0.15-0.9 MPa (20-130 psi).
AirTAC offers the GFC family in sizes 200, 300, 400 and 600 with differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) elements, standard or low-pressure regulation, and gauge options; PT is the standard thread with G (BSPP) and NPT as catalogue options. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your duty before ordering.
AirTAC GFC200-08 Combination Unit (GFC20008LNW) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008LNW) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008LNW)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008LNW) Is Used
Pneumatic valve manifold protection
Feeding a bank of directional control valves on an automated fixture, where the 5 um element keeps fine particulate out of spool clearances while the lubricator mists the moving parts.
Air-hydraulic booster supply
Providing clean, regulated, lubricated air to air-driven hydraulic boosters and intensifiers at a workholding station, with the fine filter guarding the booster's pilot circuit.
Textile machine actuation
Supplying doffing and thread-tensioning cylinders on a spinning line, where regulated low-pressure settings and continuous oil misting keep lightweight actuators running smoothly.
Is the AirTAC GFC200-08 Combination Unit (GFC20008LNW) the Right Set?
Size 200 with a PT1/4 port matches circuits whose demand fits the 200 frame; larger sizes 300, 400 and 600 give bigger ports and more flow. The W in the code selects 5 um filtration instead of the 40 um standard - choose it where downstream valves and cylinders see fine particulate; keep 40 um for general plant air. The differential-pressure drain is the default; automatic (A) and manual (M) are alternatives and change the regulator adjust range. No gauge is fitted (N code); embedded square or external round gauges in MPa, psi or bar scales are order options. PT is standard; G and NPT are catalogue options.
Flow appears only as curves in the datasheet, not as one rated figure, so ask us to confirm sizing for your line pressure and air consumption before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008LNW) FAQ
The G-series flow data is published as curves rather than a single rated figure, so we do not quote one number. Share your line pressure, port size and air demand and we will confirm the datasheet curve and sizing before you order.
The W code selects 5 um filtration, suited to protecting precision valves, cylinders and air tools from fine particulate; the standard 40 um element handles general plant air with lower element loading. Both are genuine AirTAC options on this set - tell us your downstream equipment and we will confirm the better fit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008LNW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.