AirTAC GFC200-08 Combination Unit (GFC20008MC3)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MC3) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MC3)
GFC20008MC3 is a genuine AirTAC G-series two-unit air preparation set: a filter regulator paired with a lubricator as a matched two-piece assembly. It removes water and particulate from compressed air, holds downstream pressure at a set level, and adds an oil mist for valves, cylinders and air tools. This configuration is the 200 size with PT1/4 ports, a polycarbonate bowl on the filter-regulator unit, a manual drain you operate by hand, the standard 40 um filter element, and a round pressure gauge scaled in bar.
The two-unit range covers sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, automatic, manual or differential-pressure drains, 40 um or 5 um filtration, and G (BSPP) or NPT threads alongside the PT standard. Maximum working pressure is 1.0 MPa (145 psi), the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and operating temperature is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so we confirm datasheet numbers on request.
AirTAC GFC200-08 Combination Unit (GFC20008MC3) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MC3) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MC3)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MC3) Is Used
CNC clamping circuits
Feeds the clamping cylinders on a machining cell with filtered, pressure-regulated and lubricated air, so fixtures hold at a steady set pressure while the mist protects directional valves and cylinder seals.
Packaging machinery
Conditions the air feeding glue heads, sorting gates and vacuum generators on a carton-forming line, with the manual drain letting an operator bleed accumulated water at shift start.
Workshop air-tool drops
Installed at a bench drop serving impact wrenches and ratchets: water and rust particles are stripped out, working pressure is held at the gauge setting, and every tool pass receives oil mist.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MC3) the Right Set?
Start by matching the 200 size and its 1/4 inch PT ports to your line: larger G-series sizes (300, 400, 600) carry bigger ports and more flow, so step up if demand outgrows 1/4 inch. The bowl drain is manual on this code; automatic and differential-pressure versions are available if you cannot rely on someone bleeding the bowl. This set filters to the standard 40 um grade - the W suffix gives 5 um - and reads pressure on a round bar gauge; square gauges with MPa, psi or bar scales can be ordered instead.
Thread is PT as the standard, with G (BSPP) and NPT available as order options. Flow for the G-series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MC3) FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure and downstream demand and we will confirm the sizing from the datasheet before you order.
The M in the code means the bowl is drained by hand, which suits points where an operator is on site. If the set sits where nobody can bleed it regularly, order the automatic-drain version instead; the differential-pressure drain is the catalogue default.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MC3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.