AirTAC GFC200-08 Combination Unit (GFC20008MC3K)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MC3K) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MC3K)
GFC20008MC3K is a genuine AirTAC G-series two-unit air preparation set: a filter regulator paired with a lubricator, with a reverse (check) valve fitted. It removes water and particulate from compressed air, holds downstream pressure at a set level and adds oil mist for valves, cylinders and air tools, while the check valve stops downstream air from pushing back toward the unit. This configuration is the 200 size with PT1/4 ports, polycarbonate bowls, a manual drain, the standard 40 um filter element and a round pressure gauge scaled in bar.
The two-unit range covers sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um filtration, and G (BSPP) or NPT threads alongside the PT standard. Maximum working pressure is 1.0 MPa (145 psi), the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and operating temperature is -5 to 70 C (non-freezing). Flow appears as curves, not a single rating, so we confirm datasheet figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008MC3K) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MC3K) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MC3K)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MC3K) Is Used
Pneumatic press hold-down
Regulated and lubricated air feeds a hold-down cylinder circuit, and the fitted check valve keeps the set pressure from backing out toward the supply side if line pressure dips mid-cycle.
Conveyor diverting gates
Conditions the air driving diverter and stopper gates on a distribution conveyor, with filtered, lubricated supply protecting the gate cylinders across repeated shifts.
Maintenance bench supply
Serves a plant maintenance bench where wrenches, grinders and test fixtures share one drop: water and particles are removed, pressure is set at the gauge, and the check valve holds the bench side steady.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MC3K) the Right Set?
Match the 200 size and its 1/4 inch PT ports to the line first; step up to sizes 300, 400 or 600 when demand outgrows 1/4 inch. The K suffix fits a reverse/check valve - useful where a drop in upstream supply must not let downstream air flow back - and this code uses a manual bowl drain, with automatic and differential-pressure drains available as alternatives. Filtration is the standard 40 um grade (order the W suffix for 5 um) and pressure is read on a round bar gauge; square gauges with MPa, psi or bar scales can be ordered instead.
Thread is PT as the standard, with G (BSPP) and NPT as order options. Because G-series flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MC3K) FAQ
AirTAC publishes flow for the G-series as curves, not a single rated figure, so no number is quoted here. Tell us your working pressure and the demand of the equipment downstream and we will confirm sizing from the datasheet on request.
K indicates a reverse (check) valve is fitted in the unit, so downstream air cannot flow back toward the regulator when upstream supply falls. The equivalent code without K carries no check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MC3K)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.