AirTAC GFC200-08 Combination Unit (GFC20008MF1)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MF1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MF1)
GFC20008MF1 is a genuine AirTAC G-series two-unit air preparation set: a filter regulator paired with a lubricator as a matched two-piece assembly. It removes water and particulate from compressed air, holds downstream pressure at a set level and adds oil mist for valves, cylinders and air tools. This configuration is the 200 size with PT1/4 ports, polycarbonate bowls, a manual drain, the standard 40 um filter element, and a square pressure gauge scaled in MPa.
The two-unit range covers sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, automatic, manual or differential-pressure drains, 40 um or 5 um filtration, and G (BSPP) or NPT threads alongside the PT standard. Maximum working pressure is 1.0 MPa (145 psi), the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and operating temperature is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so we confirm datasheet numbers on request.
AirTAC GFC200-08 Combination Unit (GFC20008MF1) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MF1) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MF1)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MF1) Is Used
Test rig instrumentation
Feeds pneumatic actuators on an engineering test rig where gauges and setup sheets read in MPa, so the square MPa-scale display matches the rest of the panel at a glance.
Fleet maintenance bay
Conditions the air at a truck and trailer service bay serving impact guns and jack controls, with the manual drain bled at the start of each shift and pressure set on the MPa-scale gauge.
Machine panel integration
Mounted on the pneumatic sub-plate of an automation panel, the two-unit set filters, regulates and lubricates the supply feeding the machine's valve manifold and actuators.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MF1) the Right Set?
Match the 200 size and its 1/4 inch PT ports to the line, stepping up to 300, 400 or 600 when demand outgrows 1/4 inch. The F1 suffix specifies a square gauge scaled in MPa - useful where plant gauges and drawings are in MPa - while round gauges with bar or psi scales are available as alternatives. The bowl drain is manual on this code, with automatic and differential-pressure drains available, and filtration is the standard 40 um grade (order the W suffix for 5 um).
Thread is PT as the standard, with G (BSPP) and NPT as order options. Because G-series flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MF1) FAQ
AirTAC publishes flow for the G-series as curves rather than a single rated figure, so we do not quote a number here. Send your line pressure and the demand of the equipment downstream and we will confirm the datasheet figures on request.
The F1 code carries a square gauge scaled in MPa. Round gauges are available with bar or psi scales, and square gauges can also be specified in MPa, psi or bar - pick the scale that matches the gauges already on your panel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.