AirTAC GFC200-08 Combination Unit (GFC20008MF1K)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MF1K) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MF1K)
The GFC20008MF1K is an AirTAC GFC two-unit set: a filter-regulator plus a lubricator that together filter, regulate and oil-mist lubricate compressed air. This configuration is size 200 with a 1/4 in. PT port, the standard 40 um filter element with a manual drain, an embedded square MPa gauge, and a reverse (check) valve fitted so the set also helps hold downstream pressure if supply pressure drops.
It is a genuine AirTAC part for compressed air, rated to 1.0 MPa (145 psi) maximum working pressure and -5 to 70 C (non-freezing), with polycarbonate bowls at this size. Because the drain is manual, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). Sizes 200 to 600 and further options exist in the G series; we confirm flow curves and datasheet figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008MF1K) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MF1K) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MF1K)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MF1K) Is Used
Held-pressure clamp circuits
The fitted reverse (check) valve helps hold downstream pressure in a fixture-clamping circuit if supply pressure dips, so jigs keep their set state between cycles.
Maintenance-shop tool drops
A filtered, regulated and lubricated service drop for impact wrenches and ratchets in a plant maintenance bay, with the gauge showing regulated line pressure.
Robot gripper air prep
Conditioned air for the gripper and wrist cylinders of a pick-and-place robot, combining clean regulated supply with oil-mist lubrication for the actuator pack.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MF1K) the Right Set?
Size 200 with a 1/4 in. PT port covers lighter-duty circuits; move to size 300 (3/8 in.) or 400 (1/2 in.) when the circuit needs more flow. Drain options are differential-pressure (default), automatic (A) or manual (M, this unit). The standard element is 40 um; order the W suffix for 5 um. The K suffix adds the reverse/check valve fitted here - omit it when backflow holding is not needed. PT is the standard thread; G (BSPP) and NPT are catalogue options, and the gauge can be MPa, psi or bar scale. Flow is published as curves rather than a single rating, so let us confirm sizing against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MF1K) FAQ
There is no single rated figure to quote: AirTAC publishes G-series flow as performance curves. We will confirm the curve for this size 200 set from the datasheet on request so you can check it against your consumption.
K marks a reverse (check) valve fitted to the set, which helps hold downstream pressure if supply pressure drops. The rest of the code decodes as size 200, PT1/4 port, manual drain, standard 40 um element and an embedded square MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MF1K)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.