AirTAC GFC200-08 Combination Unit (GFC20008MF1WK)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MF1WK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MF1WK)
The GFC20008MF1WK is an AirTAC GFC two-unit set: a filter-regulator plus a lubricator that together filter, regulate and oil-mist lubricate compressed air. This configuration is size 200 with a 1/4 in. PT port, a manual drain, an embedded square MPa gauge, the finer 5 um filter element (W), and a reverse (check) valve fitted (K) to help hold downstream pressure when supply pressure drops.
It is a genuine AirTAC part for compressed air, rated to 1.0 MPa (145 psi) maximum working pressure and -5 to 70 C (non-freezing), with polycarbonate bowls at this size. Because the drain is manual, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). The G series also comes in sizes 300 to 600; we confirm flow curves and datasheet figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008MF1WK) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MF1WK) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MF1WK)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MF1WK) Is Used
End-of-arm gripper circuits
Air prep for gripper cylinders on a robot end-of-arm, where the 5 um element suits compact valves and the check valve helps hold grip pressure through supply dips.
Fixture hold-between-cycles circuits
Conditioned supply for jigs and clamping fixtures that must keep their set pressure between machining cycles, with the reverse valve limiting pressure loss downstream.
Compact valve manifold feeds
A filtered, regulated and lubricated feed for dense valve-manifold panels on automated equipment, with fine 5 um filtration protecting the pilot sections.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MF1WK) the Right Set?
This code stacks two options on the size 200 / PT1/4 base: W for the 5 um element instead of the standard 40 um, and K for the reverse/check valve that helps hold downstream pressure. Drop either suffix if you need the plain version. Drain alternatives are differential-pressure (default) and automatic (A). PT is the standard thread; G (BSPP) and NPT are catalogue options, and the gauge scale can be MPa (this model), psi or bar. For heavier demand, step to size 300 (3/8 in.) or 400 (1/2 in.). Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MF1WK) FAQ
Flow for the G series is published as performance curves, not as a single rated figure, so we do not quote one number. Tell us your demand and we will confirm the size 200 curve from the datasheet on request before you order.
Yes - thread is a catalogue option. This code has no thread letter, so it is supplied with PT as standard; order the G suffix for G (BSPP) or T for NPT. The W (5 um element) and K (reverse/check valve) options fitted here can also be ordered separately.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MF1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.