AirTAC GFC200-08 Combination Unit (GFC20008MF2)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MF2) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MF2)
The AirTAC GFC20008MF2 is a genuine two-unit air-treatment set: a filter regulator unit plus a separate lubricator unit, so one mounted pair covers filtration, pressure regulation and oil-mist lubrication of compressed air. This 200-size set is configured with 1/4 in PT ports, a manual drain on the filter bowl, the standard 40 um filter element and the embedded square pressure gauge scaled in psi. The 200-size bowls are polycarbonate (PC), and the set is rated for a maximum inlet pressure of 1.0 MPa (145 psi) at -5 to 70 C.
This is a genuine AirTAC part. The same function is available across the G series in 200, 300, 400 and 600 sizes, with G (BSPP) or NPT threads, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um elements, and psi, MPa or bar gauge scales. Flow is published as curves rather than a single rated figure, so send us your condition and we will confirm the datasheet values on request.
AirTAC GFC200-08 Combination Unit (GFC20008MF2) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MF2) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MF2)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MF2) Is Used
Automotive service bench
Air supply for impact wrenches, ratchets and blow guns at a vehicle repair bench, where the filter strips water from the shop line, the regulator sets tool pressure and the lubricator mists oil for the tool motors.
Packaging machine supply
Feeding cylinders and sealing jaws on a carton-sealing conveyor line, keeping the air clean, the pressure steady and the actuator seals lubricated through each shift.
Robotic pick-and-place cell
Conditioning the air that drives gripper cylinders on a robotic handling cell, so regulated pressure and a light oil mist keep the grippers cycling smoothly.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MF2) the Right Set?
This listing is 200 size with 1/4 in PT ports and the manual-drain (M) code, which gives a regulator adjusting range of 0.05-0.9 MPa (7-130 psi); differential-pressure and automatic drain versions start from 0.15-0.9 MPa (20-130 psi). The element here is the standard 40 um grade, the gauge is the embedded square type reading psi, and a mounting bracket is included. If your circuit needs more flow, step up to the 300, 400 or 600 size with the matching port. PT is the standard thread on this listing; G (BSPP) and NPT are catalogue options to order. Because flow is published as curves, not a single rating, ask us to confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MF2) FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote one number here. Tell us your pressure condition and required flow, and we will confirm the datasheet figures for this exact set on request.
The M code means the filter bowl is drained by hand as part of routine checks, which suits lines with regular maintenance walks. It also allows a regulator adjusting range from 0.05-0.9 MPa (7-130 psi); differential-pressure and automatic drain versions start from 0.15-0.9 MPa (20-130 psi).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MF2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.