AirTAC GFC200-08 Combination Unit (GFC20008MLF1W)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MLF1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MLF1W)
GFC20008MLF1W is an AirTAC G-series two-unit set combining a filter-regulator and a lubricator, so one PT1/4 connection delivers filtered, regulated and lubricated compressed air. The 200-size body uses a manual-drain bowl, and the W code selects the finer 5 um filter element instead of the standard 40 um. The L code makes it the low-pressure type, and the F1 code fits the square embedded pressure gauge on the MPa scale.
This is a genuine AirTAC part. The G series is available in 200, 300, 400 and 600 sizes with 1/8 in to 1 in ports, with options for automatic or differential-pressure drains, round external gauges, psi or bar scales, a reverse valve, and G (BSPP) or NPT threads instead of the standard PT. Maximum inlet pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008MLF1W) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MLF1W) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MLF1W)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MLF1W) Is Used
Laboratory instrument air feeds
Conditions the compressed air feeding lab benches and pneumatic sample-handling devices, with the 5 um element capturing finer particles ahead of sensitive equipment.
Blow-off stations on SMT electronics lines
Supplies air nozzles that clear debris from PCB panels between process steps, with fine filtration helping keep nozzles clean and the lubricator supplying air tools at the bench.
Instrument-air branch feeding valve positioners
Filters, regulates and lubricates the branch supply to pneumatic valve positioners in a process plant, where the 5 um element suits pilot-grade instrument air.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MLF1W) the Right Set?
Match the size to the circuit: this 200-size set is PT1/4; choose 300 or 400 for 3/8 in to 1/2 in ports or higher air demand. The M code fits a manual drain - appropriate where the bowl is bled on a maintenance round - while automatic and differential-pressure drains are alternatives in the same size. The W element filters to 5 um; if your application only needs general protection, the standard 40 um version of this set is available. The square gauge reads MPa, with psi and bar scales as catalogue options. PT thread is the standard, with G (BSPP) and NPT to order. The L suffix selects the low-pressure type, and the catalogue adjustment range for the manual-drain version is 0.05-0.9 MPa (7-130 psi) - ask us to confirm the low-pressure setting limit for your circuit. Since AirTAC publishes flow as curves, not one rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MLF1W) FAQ
AirTAC publishes G-series flow as curves, not as a single rated figure, so we do not state a number here. Share your line pressure, downstream demand and acceptable pressure drop, and we will confirm the correct size and the flow figures from the datasheet before you order.
The F1 code specifies the square gauge on the MPa scale. Psi and bar scales are catalogue alternatives on the same gauge, the round external gauge is a separate option, and the set can also be ordered without a gauge using the N code. Choose the scale that matches the gauges already on your machines so operators read one unit throughout the plant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MLF1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.