AirTAC GFC200-08 Combination Unit (GFC20008MLF2)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MLF2) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MLF2)
GFC20008MLF2 is an AirTAC G-series two-unit set: a filter-regulator paired with a lubricator, so one unit removes water and coarse particulate and holds a set pressure while the other meters oil mist to downstream cylinders and air tools. This PT1/4 (1/4 inch) configuration is the low-pressure (L) type with a manual drain bowl and an embedded square pressure gauge in psi scale. Maximum working pressure is 1.0 MPa (145 psi), and with the manual drain the regulator adjusting range is 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFC series spans 200/300/400/600 sizes with ports from 1/8 to 1 inch; at 200 size the bowls are polycarbonate (600 size is aluminium alloy), and drain type, filter grade, gauge scale and thread are selectable options. Flow figures for G-series units are published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008MLF2) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MLF2) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MLF2)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MLF2) Is Used
Assembly bench air tools
Conditioning supply air for drills, impact drivers and air ratchets on a manual assembly bench: the filter-regulator pair keeps a steady set pressure and the lubricator feeds oil mist to keep vane motors running smoothly through the shift.
Robot gripper module feed
Feeding the gripper cylinders and valve block on a pick-and-place robot: clean, regulated, lubricated air at a fixed psi setting keeps grip force repeatable, and the manual drain bowl is purged as part of the maintenance round.
Labeling head supply
Supplying the apply cylinders and vacuum-assist circuits on a labeling machine: the low-pressure type holds modest set pressures steadily, and the psi square gauge matches a US-standard panel readout.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MLF2) the Right Set?
Match the size to your port and air demand: the 200 body with 1/4 inch PT ports fits compact supply drops, with 300/400/600 stepping up for larger lines. Drain choices are differential-pressure (default), automatic or manual; this unit uses manual drain, which gives the widest quoted adjusting range of 0.05-0.9 MPa (7-130 psi). Filter grade is the 40 um standard; choose the W option if you need 5 um. The gauge is the embedded square type in psi scale, also offered in MPa or bar, or omitted entirely. Thread is PT as standard with G (BSPP) and NPT as catalogue options. Flow is published as curves, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MLF2) FAQ
Flow for this series is published as curves rather than a single rated figure, so there is no one l/min or SCFM number we can state here. Give us your operating pressure and connected load and we will confirm the sizing against the datasheet curves on request.
The 40 um element in this unit is the standard grade and suits general cylinders, valves and air tools. Choose the W-coded 5 um grade if the downstream equipment is sensitive to finer contamination, such as precision actuators or spray equipment; it is a selectable option on the same body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MLF2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.