AirTAC GFC200-08 Combination Unit (GFC20008MLF3)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MLF3) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MLF3)
GFC20008MLF3 is an AirTAC G-series two-unit set: a filter-regulator paired with a lubricator, so one unit removes water and coarse particulate and holds a set pressure while the other meters oil mist to downstream cylinders and air tools. This PT1/4 (1/4 inch) configuration is the low-pressure (L) type with a manual drain bowl and an embedded square pressure gauge in bar scale. Maximum working pressure is 1.0 MPa (145 psi), and with the manual drain the regulator adjusting range is 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFC series spans 200/300/400/600 sizes with ports from 1/8 to 1 inch; at 200 size the bowls are polycarbonate (600 size is aluminium alloy), and drain type, filter grade, gauge scale and thread are selectable options. Flow figures for G-series units are published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
AirTAC GFC200-08 Combination Unit (GFC20008MLF3) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MLF3) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MLF3)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MLF3) Is Used
Bar-scaled machine line supply
Conditioning air to small actuators and clamp cylinders on an assembly line built to European practice: the square bar gauge reads in the unit the line documentation expects, while the set filters, regulates and lubricates in one pair.
Bench-top test rig feed
Supplying pneumatically actuated test fixtures and lab rigs: the low-pressure type holds a steady set pressure for repeatable fixture clamping, and the manual-drain polycarbonate bowl is purged before each test session.
Process valve actuator panel
Feeding small pneumatic valve actuators on a process skid: filtered, regulated and lubricated air keeps the actuator strokes consistent, and the bar-scale gauge lets operators verify set pressure at the panel.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MLF3) the Right Set?
Size the unit by port and air demand: the 200 body with 1/4 inch PT ports suits compact supply drops, and 300/400/600 step up for heavier lines. Drain choices are differential-pressure (default), automatic or manual; this configuration has manual drain, which gives the widest quoted adjusting range of 0.05-0.9 MPa (7-130 psi). Filter grade is the 40 um standard, with a 5 um W option if the application needs finer filtration. The gauge is the embedded square type in bar scale, also offered in MPa or psi, or can be omitted. Thread is PT as standard with G (BSPP) and NPT as catalogue options. Flow is published as curves, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MLF3) FAQ
There is no single rated flow figure for this series: AirTAC publishes G-series flow as curves only, so we deliberately do not state an l/min or SCFM value. Share your line conditions and connected equipment and we will confirm sizing from the datasheet on request.
Yes. The embedded square gauge is offered in MPa, psi or bar scale, and the gauge can be omitted with the N code if your panel already carries its own instrument. This configuration is the bar-scale version; the other scales are separate catalogue codes on the same 200-size body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MLF3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.