AirTAC GFC200-08 Combination Unit (GFC20008MLNW)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MLNW) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MLNW)
The AirTAC GFC series is a two-piece air-treatment set: a filter regulator (which removes water and particulate and sets downstream pressure in one body) paired with a separate lubricator that adds an oil mist to the air line. This configuration is the 200 size with a 1/4 in PT port, a manual drain on the filter bowl, a fine 5 um filter element (W grade), the low-pressure (L) regulator type with an adjustment range up to 0.4 MPa, and no gauge fitted. With no gauge on board, pair it with your own instrumentation or ask us about gauge options on other variants.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600 (larger size means larger port and more flow), with a choice of 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, gauge options, and PT (standard), G (BSPP) or NPT threads. Published flow data appears as curves rather than a single rating, so we confirm flow and datasheet figures for your application on request.
AirTAC GFC200-08 Combination Unit (GFC20008MLNW) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MLNW) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MLNW)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MLNW) Is Used
Low-pressure pneumatic clamping on assembly fixtures
Mounted at the drop to a clamping fixture that must run at reduced pressure, this set filters water and fine particles, holds the set pressure with the low-pressure regulator, and mists oil to the cylinder seals - the manual drain suits a shift-start maintenance routine.
Air supply to laboratory actuated valves
On a lab skid where pilot air feeds small actuated valves, the 5 um element keeps fine debris out of pilot circuits while the lubricator protects moving valve internals; the low-pressure type matches a gentle supply pressure.
Bench air for jig and tooling stations
At a manual workbench running air tools and jigs, the filter regulator cleans and sets the supply while the lubricator keeps tool motors running smoothly; the 1/4 in port and manual drain fit a compact, operator-serviced point of use.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MLNW) the Right Set?
Start with the size and port: this 200-size unit has a 1/4 in PT port, so step up to 300, 400 or 600 if your line demands more flow. The manual drain here means an operator opens the bowl drain periodically - if you want unattended condensate removal, choose automatic (A) or the differential-pressure default instead. The 5 um element (W) suits finer point-of-use protection; the 40 um standard element is the usual general-line choice. This variant carries no gauge; gauge and scale options exist on other GFC codes. Thread is PT as standard, with G (BSPP) and NPT available as catalogue options; a bracket is optional.
Because flow is published as curves rather than one rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MLNW) FAQ
AirTAC publishes air-treatment flow as curves rather than a single rated figure, so we do not quote one number here. Tell us your application and we will confirm the flow figures from the datasheet for this 200-size, 1/4 in unit on request.
The N in the code means no gauge is fitted on this variant; gauge and scale options are available on other GFC codes. This set uses a manual drain, which suits stations where an operator drains the bowl regularly - choose automatic (A) or the differential-pressure default for unattended lines.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MLNW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.