AirTAC GFC200-08 Combination Unit (GFC20008MN)
The AirTAC AirTAC GFC200-08 Combination Unit (GFC20008MN) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC200-08 Combination Unit (GFC20008MN)
The AirTAC GFC series is a two-piece air-treatment set: a filter regulator (which removes water and particulate and sets downstream pressure in one body) paired with a separate lubricator that adds an oil mist to the air line. This configuration is the 200 size with a 1/4 in PT port, a manual drain on the filter bowl, the standard 40 um filter element, the standard regulator type with a 0.05-0.9 MPa (7-130 psi) manual-drain adjustment range, and no gauge fitted.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600 (larger size means larger port and more flow), with a choice of 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, gauge options, and PT (standard), G (BSPP) or NPT threads. Published flow data appears as curves rather than a single rating, so we confirm flow and datasheet figures for your application on request.
AirTAC GFC200-08 Combination Unit (GFC20008MN) Technical Specifications
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MN) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC200-08 Combination Unit (GFC20008MN)
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC200-08 Combination Unit (GFC20008MN) Is Used
Air supply to conveyor diverters and stoppers
Feeding the cylinders on a packaging conveyor's diverters and stop stations, this set cleans the supply, holds a stable working pressure and oils the actuators; the manual drain suits an end-of-shift check.
Maintenance-shop air drops for hand tools
On a maintenance shop's 1/4 in drops serving impact wrenches and air ratchets, the filter regulator removes water and sets tool pressure while the lubricator keeps tool motors fed with oil mist.
General plant FRL for small pneumatic panels
Installed as the point-of-entry treatment on a small machine's pneumatic panel, this two-unit set protects downstream valves and cylinders across the whole machine; the 40 um element handles general plant air.
Is the AirTAC GFC200-08 Combination Unit (GFC20008MN) the Right Set?
This 200-size unit carries a 1/4 in PT port; step up to 300, 400 or 600 when your line needs more flow. The manual drain means periodic operator draining - pick automatic (A) or the differential-pressure default for lines that run unattended. The standard 40 um element is the everyday choice for general pneumatic supply; specify W for a 5 um fine element. No gauge is fitted on this variant; gauge and scale choices exist on other codes. Thread is PT as standard, with G (BSPP) and NPT orderable as catalogue options.
Because flow is published as curves rather than one rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC GFC200-08 Combination Unit (GFC20008MN) FAQ
AirTAC publishes flow for the G series as curves rather than a single rated number, so we do not state one here. Share your application and required flow and we will confirm the figures from the datasheet for this 200-size, 1/4 in unit on request.
The M in the code means the filter bowl is drained manually by an operator, and the regulator's adjustment range is 0.05-0.9 MPa (7-130 psi) on this drain type. Automatic (A) and the differential-pressure default are available on other GFC codes if you prefer unattended draining.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC200-08 Combination Unit (GFC20008MN)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.