AirTAC GFC300-08 Combination Unit (GFC30008AC1W)
The AirTAC AirTAC GFC300-08 Combination Unit (GFC30008AC1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-08 Combination Unit (GFC30008AC1W)
GFC30008AC1W is a two-piece AirTAC GFC air-preparation set for compressed air: a filter-regulator body plus a separate lubricator, so filtration, pressure regulation and oil-mist lubrication come from one order. This configuration is the size 300 frame with a 1/4 in PT port, an automatic drain on the filter bowl, the finer 5 um filter element (W) instead of the 40 um standard, and an external round pressure gauge reading in MPa; no reverse (check) valve is fitted. The regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), maximum working pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C non-freezing, and the 300-size filter bowl is PC (polycarbonate).
This is a genuine AirTAC part. The GFC family runs in size 200, 300, 400 and 600 frames with ports from 1/8 in to 1 in, and options covering 40 um or 5 um elements, differential-pressure, automatic or manual drains, external round or square gauges in MPa, psi or bar scales, and a reverse/check valve. Flow for the G series is published as curves rather than a single rated figure, so we confirm the datasheet numbers for your application on request.
AirTAC GFC300-08 Combination Unit (GFC30008AC1W) Technical Specifications
| Model | AirTAC GFC300-08 Combination Unit (GFC30008AC1W) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-08 Combination Unit (GFC30008AC1W)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-08 Combination Unit (GFC30008AC1W) Is Used
Toolroom die grinders
Supplies die grinders and small sanders at a mould-toolroom bench: the 5 um element filters finer than the standard grade, the regulator sets working pressure and the lubricator mists oil for the tool motors.
Bottling line cylinder circuits
Conditions air for the pusher and stopper cylinders on a bottling conveyor, with automatic condensate draining and the finer 5 um grade feeding the line directional valves.
Pneumatic press ejector circuit
Feeds the ejector cylinders on a stamping press; the set filters, regulates and lubricates the supply, and the round MPa gauge shows the set working pressure at the unit.
Is the AirTAC GFC300-08 Combination Unit (GFC30008AC1W) the Right Set?
The decodable choices: frame size (200/300/400/600) and port (1/8 to 1 in) stepped against the air your circuit uses; drain type - A here is automatic, against the default differential-pressure drain and M manual; element grade - the W in this code selects the 5 um element over the 40 um standard; gauge - C1 is the external round gauge in MPa, with psi (2), bar (3) and square-gauge options; and thread - PT is standard, with G (BSPP) and NPT as catalogue options. Flow is published as curves, not one rated number, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC GFC300-08 Combination Unit (GFC30008AC1W) FAQ
AirTAC publishes G-series flow capacity as curves rather than a single rated figure, so we do not state a number here. Share your working pressure and air demand and we will confirm the sizing from the datasheet on request.
The blank code is the 40 um standard element; W selects the 5 um element for finer particle removal, which is what this model carries. Both are catalogue grades on the GFC filter stage, so choose by how clean the downstream valves and actuators need the air to be.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-08 Combination Unit (GFC30008AC1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.