AirTAC GFC300-08 Combination Unit (GFC30008ALC1)
The AirTAC AirTAC GFC300-08 Combination Unit (GFC30008ALC1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-08 Combination Unit (GFC30008ALC1)
GFC30008ALC1 is a genuine AirTAC GFC two-unit air-preparation set for compressed air: a filter-regulator that strips water and particulate and holds downstream pressure, plus a separate lubricator that meters oil mist to downstream equipment. This 300-size set has PT1/4 ports, an automatic drain, the standard 40 um element and the low-pressure regulator type, intended for circuits that run at reduced set-points. It is fitted with the external round pressure gauge scaled in MPa.
You are buying a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with PT, G (BSPP) or NPT threads, 40 um or 5 um filtration, automatic, manual or differential-pressure drains, and square or round gauges in MPa, psi or bar scales. The filter-regulator bowl on this 300 size is polycarbonate. Inlet pressure is rated to 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so send us your application and we will confirm sizing, the low-pressure set-point band and datasheet figures on request.
AirTAC GFC300-08 Combination Unit (GFC30008ALC1) Technical Specifications
| Model | AirTAC GFC300-08 Combination Unit (GFC30008ALC1) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-08 Combination Unit (GFC30008ALC1)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-08 Combination Unit (GFC30008ALC1) Is Used
Pneumatic clamping fixtures
Regulates and lubricates air for low-pressure clamp cylinders on a machining fixture, protecting the workpiece while keeping the circuit supplied with clean, oiled air.
Textile machine air jets
Prepares air for the doffing and threading cylinders on a spinning frame, where the low-pressure type matches circuits run below standard plant pressure.
Low-pressure actuated process valves
Supplies filtered, lubricated air to diaphragm actuators on a water-treatment valve skid, with the automatic drain clearing condensate from the bowl.
Is the AirTAC GFC300-08 Combination Unit (GFC30008ALC1) the Right Set?
This 300-size set with 1/4 in ports sits in the middle of the G series range of 200, 300, 400 and 600 frames - pick the size that matches your port and flow requirement. The key choice on this code is the low-pressure regulator type: choose it when your circuit runs at a reduced set-point, or the standard type when full-range regulation is needed; we confirm the exact set-point band from the datasheet on request. The automatic drain handles condensate unattended, and the 40 um element suits general plant air. The round gauge is scaled in MPa; square or psi/bar scales are orderable. PT thread is standard, with G (BSPP) and NPT as catalogue options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC GFC300-08 Combination Unit (GFC30008ALC1) FAQ
We do not quote a single flow number because AirTAC publishes flow for this series as curves rather than a rated figure. Tell us your line pressure, port size and downstream demand and we will confirm the flow curve and datasheet figures for this model on request.
The L in GFC30008ALC1 decodes as the low-pressure regulator type, chosen for circuits that operate at reduced set-points; the standard type covers the full regulation range. Both share the same filtering, drain and lubrication functions, and we confirm the exact set-point band from the datasheet on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-08 Combination Unit (GFC30008ALC1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.