AirTAC GFC300-08 Combination Unit (GFC30008ALC1W)
The AirTAC AirTAC GFC300-08 Combination Unit (GFC30008ALC1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-08 Combination Unit (GFC30008ALC1W)
GFC30008ALC1W is a genuine AirTAC GFC two-unit air-preparation set for compressed air: a filter-regulator that removes water and fine particulate and holds downstream pressure, plus a separate lubricator that meters oil mist to downstream equipment. This 300-size set has PT1/4 ports, an automatic drain, the finer 5 um filter element (the W option), the low-pressure regulator type and the external round pressure gauge scaled in MPa.
You are buying a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with PT, G (BSPP) or NPT threads, 40 um standard or 5 um filtration, automatic, manual or differential-pressure drains, and square or round gauges in MPa, psi or bar scales. The filter-regulator bowl on this 300 size is polycarbonate. Inlet pressure is rated to 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so send us your application and we will confirm sizing, the low-pressure set-point band and datasheet figures on request.
AirTAC GFC300-08 Combination Unit (GFC30008ALC1W) Technical Specifications
| Model | AirTAC GFC300-08 Combination Unit (GFC30008ALC1W) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-08 Combination Unit (GFC30008ALC1W)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-08 Combination Unit (GFC30008ALC1W) Is Used
Lab automation actuators
Feeds clean, regulated, lubricated air to the pick-and-place cylinders on a laboratory sample-handling bench, with 5 um filtration guarding sensitive pilot valves.
Electronics assembly fixtures
Supplies fine-filtered, low-pressure regulated air to hold-down clamps on a PCB test fixture, keeping moisture and particles away from the actuator circuit.
Pneumatic sorting gates
Prepares air for the ejector and gate cylinders on a product sorting line, with the automatic drain and 5 um element supporting the pilot valves.
Is the AirTAC GFC300-08 Combination Unit (GFC30008ALC1W) the Right Set?
Choose the W code when the 40 um standard element is too coarse for the valves and cylinders downstream - this set carries the 5 um element. Otherwise the same choices apply: the 300 frame with 1/4 in ports from the G series range of 200, 300, 400 and 600; the low-pressure regulator type for reduced set-point circuits (set-point band confirmed from the datasheet on request); and the automatic drain for unattended condensate removal, with manual and differential-pressure drains as the alternatives. The round gauge is scaled in MPa, and other scales are orderable. PT thread is standard, with G (BSPP) and NPT as catalogue options. Flow is published as curves, not one rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC GFC300-08 Combination Unit (GFC30008ALC1W) FAQ
AirTAC publishes flow for this series as curves rather than a single rated figure, so there is no one number to quote. Share your line pressure, port size and downstream demand and we will confirm the flow curve and datasheet figures for this exact model on request.
The W ending on GFC30008ALC1W decodes as the 5 um filter element instead of the 40 um standard, giving finer particulate removal for pilot valves and precision actuators. If your application is general plant air, the same set without W uses the standard element.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-08 Combination Unit (GFC30008ALC1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.