AirTAC GFC300-08 Combination Unit (GFC30008LF1)
The AirTAC AirTAC GFC300-08 Combination Unit (GFC30008LF1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-08 Combination Unit (GFC30008LF1)
GFC30008LF1 is a two-piece AirTAC G-series air-treatment set: a filter-regulator paired with a lubricator, giving the downstream circuit filtered, regulated and oil-mist-lubricated compressed air through PT1/4 (1/4 inch) ports. The regulator is the low-pressure type for circuits set below standard line pressure, the 40 um element with differential-pressure drain handles water and particulate removal, and the set is fitted with a square pressure gauge scaled in MPa.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with 1/8 to 1 inch ports; options across the family include automatic or manual drains, a 5 um filter element, external round gauges, psi or bar scales, and G (BSPP) or NPT threads. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request.
AirTAC GFC300-08 Combination Unit (GFC30008LF1) Technical Specifications
| Model | AirTAC GFC300-08 Combination Unit (GFC30008LF1) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-08 Combination Unit (GFC30008LF1)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-08 Combination Unit (GFC30008LF1) Is Used
Assembly station air tools
Feeding screwdrivers and small impact tools at assembly benches that run at reduced pressure, with the oil mist extending tool motor life and the 40 um filter stopping scale from entering the collet mechanism.
Textile machine air jets
Running thread-guiding and cleaning air jets on a weaving or spinning frame set below main line pressure, keeping the jets supplied with filtered, regulated and lubricated air.
Actuated process valves on a skid
Supplying pilot air to actuated ball and butterfly valves on a process skid running at low pressure, with lubrication protecting the positioner and actuator internals.
Is the AirTAC GFC300-08 Combination Unit (GFC30008LF1) the Right Set?
Both units are size 300 with PT1/4 (1/4 inch) ports; step to 200, 400 or 600 for a different port size. The filter-regulator bowl uses the differential-pressure drain as its default, with automatic (A) and manual (M) versions orderable, and the 300-size bowl is polycarbonate. The 40 um element is standard - the W suffix gives 5 um. This code's F position specifies the square gauge on the MPa scale; round-gauge versions and psi or bar scales are available in the family. The regulator is the low-pressure type, so confirm its adjustment range against your setpoint with us. PT is the standard thread, with G (BSPP) and NPT available to order. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
AirTAC GFC300-08 Combination Unit (GFC30008LF1) FAQ
Yes. AirTAC publishes flow for this size as performance curves rather than a single rated figure, which is why no flow number appears here. Send your operating pressure and air demand and we will confirm the figures from the datasheet and check the sizing against your application.
They are the gauge options: F specifies the square gauge and C the external round gauge, each with a trailing scale digit (1 = MPa, 2 = psi, 3 = bar). This model, GFC30008LF1, carries the square gauge on the MPa scale. Drain type and the 5 um W element are separate choices we can walk through on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-08 Combination Unit (GFC30008LF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.