AirTAC GFC300-10 Combination Unit (GFC30010AF1WK)
The AirTAC AirTAC GFC300-10 Combination Unit (GFC30010AF1WK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-10 Combination Unit (GFC30010AF1WK)
This GFC300-10A-F1WK combines AirTAC's two-unit F.R.L. concept - filter regulator plus lubricator - with the 5 um (W) filtration element and a fitted reverse-flow (check) valve for circuits where air must not pass back toward the supply. It is the 300 size with PT 3/8 in. ports, an automatic drain on the filter bowl and the embedded square gauge reading in MPa. The regulator adjusts from 0.15-0.9 MPa (20-130 psi) at up to 1.0 MPa (145 psi) inlet; medium is compressed air, temperature range is -5 to 70 C (non-freezing), and both bowls on this 300 size are polycarbonate (PC).
This is a genuine AirTAC part. The W and K codes are catalogue options on the GFC two-unit set, which also comes in 200, 300, 400 and 600 sizes with 1/8 to 1 in. ports, differential-pressure or manual drains, the 40 um standard element, embedded square or external round gauges in MPa, psi or bar scales, and PT (standard), G (BSPP) or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
AirTAC GFC300-10 Combination Unit (GFC30010AF1WK) Technical Specifications
| Model | AirTAC GFC300-10 Combination Unit (GFC30010AF1WK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-10 Combination Unit (GFC30010AF1WK)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-10 Combination Unit (GFC30010AF1WK) Is Used
Maintenance-shop air tool stations
A prepared-air point for impact wrenches, ratchets and air screwdrivers on a maintenance bench, with the 5 um element protecting the tools and the check-valve option where the branch must resist backflow.
Clamp-and-hold fixture circuits
Regulated, filtered and lubricated air for clamping fixtures where the fitted reverse-flow (check) valve is specified because the circuit must not push air back toward the header.
Automated dispenser and pick-and-place cells
Feeds the valve manifold of a dispensing or pick-and-place cell: fine 5 um filtration ahead of the valves, a fixed set pressure from the regulator, and lubrication for the actuator package.
Is the AirTAC GFC300-10 Combination Unit (GFC30010AF1WK) the Right Set?
This variant stacks two choices: the 5 um W element for finer filtration and the K reverse-flow (check) valve where backflow toward the supply must be prevented - omit either by ordering the F1W or F1K code. Size stays at 300 with 3/8 in. PT ports; move to 200 for compact points or 400/600 for larger ports and more flow. The automatic drain ejects condensate without attention, and the embedded square gauge reads MPa, with psi/bar scales and an external round gauge as options.
Flow for the G series is published as curves, not a single rating, so give us your application's flow and pressure and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
AirTAC GFC300-10 Combination Unit (GFC30010AF1WK) FAQ
G-series flow is published by AirTAC as performance curves, not as a single rated figure, so we do not state a number here. Send us your required flow and working pressure and we will confirm the size and supply the datasheet on request before you order.
This model has PT 3/8 in. ports as standard. If your piping uses BSPP (G) or NPT, those are catalogue thread options available on the same size - mention it at the enquiry stage and we will confirm the matching code and its datasheet on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-10 Combination Unit (GFC30010AF1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.