AirTAC GFC300-10 Combination Unit (GFC30010C3)
The AirTAC AirTAC GFC300-10 Combination Unit (GFC30010C3) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-10 Combination Unit (GFC30010C3)
The AirTAC GFC series pairs a filter-regulator, which strips water and particulate from compressed air and stabilises downstream pressure, with a lubricator that meters oil mist into the line for tools and cylinders. This GFC30010C3 is the size 300 frame with PT 3/8 in ports, a standard 40 um element, and a polycarbonate bowl with differential-pressure drain on the filter-regulator section. The round gauge is scaled in bar. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts 0.15-0.9 MPa (20-130 psi) with this drain type, and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The G-series runs from size 200 up to 600, with bigger frames giving larger ports and more flow, and catalogue options include a 5 um element, automatic or manual drains, NPT or G (BSPP) threads, other gauge scales, and no-gauge variants. Because AirTAC publishes flow as curves rather than a single rated figure, we will confirm the datasheet numbers for your duty on request.
AirTAC GFC300-10 Combination Unit (GFC30010C3) Technical Specifications
| Model | AirTAC GFC300-10 Combination Unit (GFC30010C3) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-10 Combination Unit (GFC30010C3)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-10 Combination Unit (GFC30010C3) Is Used
Furniture plant nail and staple stations
At nailing and stapling stations in a furniture plant, the set dries and filters the shop air, holds regulated pressure to the guns and feeds a light oil mist so the drivers keep cycling cleanly.
Bottling line capper air motors
Supplying the air motors on a bottling-line capper, the filter-regulator protects the motors from condensate and holds set pressure while the lubricator keeps a consistent oil mist in the drive air.
Palletizer gripper circuit
On a palletizer cell, the unit feeds the gripper and clamp cylinders: filtered, regulated air for precise actuation, plus oil mist for the cylinders' long-duty cycling between pallet loads.
Is the AirTAC GFC300-10 Combination Unit (GFC30010C3) the Right Set?
Choose size 300 with 3/8 in PT ports when your header is 3/8 in and your flow demand sits mid-range; step to 200 for compact benches or 400/600 for heavier lines, and we can check the flow curves against your application first. The differential-pressure drain here opens the bowl by itself as water accumulates; automatic and manual drain variants are in the range. The 40 um element is the standard grade; specify the W option for 5 um filtration. This version's round gauge reads in bar; psi and MPa scale gauges are also offered. PT thread is standard, with G (BSPP) and NPT as catalogue options, and a bracket is available.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
AirTAC GFC300-10 Combination Unit (GFC30010C3) FAQ
AirTAC gives G-series flow as performance curves rather than one rated figure, so we do not state a single number here. Share your line pressure and downstream air demand and we will confirm the sizing from the datasheet on request before you order.
C3 selects the round gauge scaled in bar. Otherwise it is the standard GFC300 two-unit set: 3/8 in PT ports, 40 um element, differential-pressure drain. Round psi-scale (C2), square MPa-scale (F1) and no-gauge (N) versions are available in the same family.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-10 Combination Unit (GFC30010C3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.