AirTAC GFC300-15 Combination Unit (GFC30015AF3W)
The AirTAC AirTAC GFC300-15 Combination Unit (GFC30015AF3W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/2"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC300-15 Combination Unit (GFC30015AF3W)
The GFC30015AF3W is an AirTAC G-series two-unit air preparation set: a 300-size filter regulator paired with a separate lubricator, so filtration, pressure regulation and oil-mist lubrication are covered in two pieces. This configuration is drilled for 1/2 inch ports on standard PT thread, has an automatic drain that expels condensate from the filter bowl without operator attention, a 5 um element for finer filtration than the standard 40 um, and a square gauge reading in bar.
It is a genuine AirTAC part, rated for a maximum working pressure of 1.0 MPa (145 psi) and -5 to 70 C non-freezing operation; on the 300 size both the filter-regulator and lubricator bowls are polycarbonate. The G series runs from size 200 to 600 with a choice of drain types, 40 um or 5 um filtration, gauge styles and scales, and PT, G or NPT threads. Because flow is published as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.
AirTAC GFC300-15 Combination Unit (GFC30015AF3W) Technical Specifications
| Model | AirTAC GFC300-15 Combination Unit (GFC30015AF3W) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC300-15 Combination Unit (GFC30015AF3W)
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC300-15 Combination Unit (GFC30015AF3W) Is Used
CNC machining center air supply
Feeds dry, regulated, lubricated air to the tool-changer clamps, chip augers and spindle air-seal circuit of a machining center, with the 5 um element protecting fine pilot valves from condensate carryover.
Automated assembly cell
Prepares plant air for pick-and-place grippers, pneumatic screwdrivers and clamping fixtures in a robot assembly cell, keeping the regulator set point visible on the bar dial at the cell panel.
Bottling line actuators
Supplies capping heads, pusher cylinders and diverters on a bottling line, where the automatic drain handles condensate from humid compressor air without a maintenance walk-round.
Is the AirTAC GFC300-15 Combination Unit (GFC30015AF3W) the Right Set?
At 1/2 inch PT this 300-size set suits lines whose demand has outgrown 1/4-inch or 3/8-inch units; step down to size 200 with a smaller port if consumption is modest. With the automatic drain, the regulator adjusting range is 0.15-0.9 MPa (20-130 psi); a manual-drain variant would widen the low end to 0.05-0.9 MPa (7-130 psi). The trailing W selects 5 um filtration instead of the standard 40 um, and F3 specifies the square gauge in bar; round external gauges and MPa or psi scales are also orderable. Thread stays PT unless you order the G (BSPP) or NPT option. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
AirTAC GFC300-15 Combination Unit (GFC30015AF3W) FAQ
AirTAC publishes G-series performance as flow curves, not as a single rated number, so we do not quote a rated flow. Send us your working pressure and air consumption and we will confirm the right size from the datasheet curve before you order.
W selects the 5 um filter element instead of the standard 40 um. The bowl and automatic drain work the same either way; choose 5 um when finer pilot valves or instruments sit downstream. We can confirm element details from the datasheet on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC300-15 Combination Unit (GFC30015AF3W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.