AirTAC GFC400-10 Combination Unit (GFC40010MNWK)
The AirTAC AirTAC GFC400-10 Combination Unit (GFC40010MNWK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC400-10 Combination Unit (GFC40010MNWK)
The AirTAC GFC40010MNWK is a two-unit air preparation set: a filter-regulator plus a lubricator, so downstream air is filtered, regulated and lubricated in one 400-size assembly. The W suffix selects the finer 5 um filter element, and the K suffix adds a reverse (check) valve. This configuration is sized for PT3/8 ports, has a manual drain on the filter bowl and no gauge. Maximum working pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the 400-size bowl is polycarbonate (PC).
This is a genuine AirTAC part. The G series is made in 200, 300, 400 and 600 sizes, with a choice of PT, G (BSPP) or NPT threads, drain types, filter grades and gauge options. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and sizing for your application on request.
AirTAC GFC400-10 Combination Unit (GFC40010MNWK) Technical Specifications
| Model | AirTAC GFC400-10 Combination Unit (GFC40010MNWK) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC400-10 Combination Unit (GFC40010MNWK)
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-10 filter regulator and GL400-10 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT3/8" · 5 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-10 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC400-10 Combination Unit (GFC40010MNWK) Is Used
CNC pallet clamping
Conditions air for the pallet-clamping cylinders on a CNC machining centre, pairing the 5 um element with the check valve to protect the clamping circuit.
Robot end-effector cell
Prepares regulated, lubricated air for grippers and tool-changer locks on a robotic assembly cell, where fine filtration guards the compact control valves.
Mobile service rig air feed
Filters and regulates the air feeding torque tools on a field service rig's compressor-fed manifold, with the check valve holding set pressure if the compressor unloads.
Is the AirTAC GFC400-10 Combination Unit (GFC40010MNWK) the Right Set?
Match the 400 size and its PT3/8 ports to your line's port size and air demand; 300 and 600 sizes change both port and flow capacity. This version combines the 5 um element (W) for finer particulate protection with the K option - a reverse (check valve) - for circuits that must hold their conditioned state if supply pressure is interrupted. The drain is manual, with automatic and differential-pressure drain versions available, and threads can be ordered as PT (standard), G (BSPP) or NPT. Flow is published as curves, not one rated number, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-10 filter regulator on its own.
AirTAC GFC400-10 Combination Unit (GFC40010MNWK) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so no single rated number is stated. Give us your application's air demand and we will confirm the datasheet flow figures for the 400 size with PT3/8 ports on request.
Only the K suffix: this version has a reverse (check valve) fitted on the regulator side, while the GFC40010MNW does not. Everything else matches - PT3/8 ports, manual drain, 5 um filter element, two-unit filter-regulator plus lubricator layout, and no gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC400-10 Combination Unit (GFC40010MNWK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.