AirTAC GFC400-15 Combination Unit (GFC40015MF1)
The AirTAC AirTAC GFC400-15 Combination Unit (GFC40015MF1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/2"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC400-15 Combination Unit (GFC40015MF1)
The AirTAC GFC40015MF1 is a genuine two-unit air-treatment set: a filter regulator plus a separate lubricator, so one assembly filters water and particulate from the compressed air, regulates downstream pressure and adds oil mist for pneumatic actuators. This 400-size configuration is built for PT1/2" ports, has a manual drain on the polycarbonate filter bowl, a 40 um standard filter element and an embedded square pressure gauge reading in MPa. Maximum inlet pressure is 1.0 MPa (145 psi); with the manual-drain set the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi); working temperature is -5 to 70 C (non-freezing); compressed air is the only medium.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes, covering ports from 1/8" to 1", with differential-pressure (default), automatic or manual drains, 40 um standard or 5 um (W) elements, and G (BSPP) or NPT threads as catalogue options. Flow is published as curves rather than a single rated figure, so we confirm flow and other datasheet values on request.
AirTAC GFC400-15 Combination Unit (GFC40015MF1) Technical Specifications
| Model | AirTAC GFC400-15 Combination Unit (GFC40015MF1) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC400-15 Combination Unit (GFC40015MF1)
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC400-15 Combination Unit (GFC40015MF1) Is Used
Injection molding machine air drops
Conditions the 1/2" compressed-air feed to an injection molding machine's clamp and ejector cylinders: water and particulate filtered out, pressure held at setpoint, oil mist fed to the actuators. The manual drain suits plants where operators bleed the bowls during shift checks.
Carton packaging line gating
Feeds filtered, regulated, lubricated air to the gate and pusher cylinders on a carton-sealing conveyor, keeping the directional valves clean and the push-off action consistent through the shift.
CNC machining center supply
Serves the tool-change cylinders and air-actuated clamps on a CNC machining center, where treated air protects the machine's pneumatic valve stack between scheduled drain rounds.
Is the AirTAC GFC400-15 Combination Unit (GFC40015MF1) the Right Set?
Step up through the 200/300/400/600 sizes to match the port and air demand of the line; the 400 size at PT1/2" serves mid-to-high demand circuits. Drain is manual here (open the bowl valve during routine checks); choose automatic (A) or the differential-pressure default if unattended water removal matters. The element is the 40 um standard; add the W suffix for a 5 um element. The embedded square gauge reads MPa, external round gauges with MPa/psi/bar scales are available, G (BSPP) and NPT threads are order options, and the bracket is included unless the J suffix is specified. Flow appears in the catalogue only as curves, not one rating, so send us your flow demand and we will confirm the right size against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC GFC400-15 Combination Unit (GFC40015MF1) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote a number here. Tell us your application flow and port requirements and we will confirm the sizing against the datasheet on request.
The M in this code means an operator opens the drain valve to expel collected water - simple and dependable where bowls are checked routinely. The differential-pressure default drains under flow conditions, and the A suffix adds a fully automatic drain. Regulation and lubrication performance is otherwise the same choice of maintenance routine.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC400-15 Combination Unit (GFC40015MF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.