AirTAC GFC400-15 Combination Unit (GFC40015MNWK)
The AirTAC AirTAC GFC400-15 Combination Unit (GFC40015MNWK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/2"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC400-15 Combination Unit (GFC40015MNWK)
The AirTAC GFC40015MNWK is a two-unit air-treatment set: a filter regulator and a separate lubricator in one 400-size package, providing filtration, regulation and lubrication in one installation. The W specifies the fine 5 um filter element, and the K adds a reverse (check) valve fitted in the regulator section - confirm the check-valve detail on the datasheet. The set is PT1/2 ported with PT threads as standard, the filter bowl has a manual drain, and the standard-type regulator adjusts over 0.05-0.9 MPa (7-130 psi) in the manual-drain configuration; maximum working pressure is 1.0 MPa (145 psi). No gauge is fitted.
This is a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with optional G (BSPP) and NPT thread variants, automatic or differential-pressure drains and gauge choices on regulator-equipped units. The 400-size bowls on the filter and lubricator are PC (polycarbonate). Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
AirTAC GFC400-15 Combination Unit (GFC40015MNWK) Technical Specifications
| Model | AirTAC GFC400-15 Combination Unit (GFC40015MNWK) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC400-15 Combination Unit (GFC40015MNWK)
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC400-15 Combination Unit (GFC40015MNWK) Is Used
Maintenance-shop test bench
Fit the GFC40015MNWK on a maintenance shop's test bench supply, combining the 5 um element, check-valve option and lubricator for actuator and valve testing through one 1/2 inch regulated line.
Robot end-effector air circuit
Install the set on the drop feeding a robot's gripper and tool-changer circuit, where fine filtration protects the small control valves and the check-valve option supports the gripper's hold behaviour - details per datasheet.
Sortation module control air
Use the two-unit set on the control-air header of a parcel sortation module array, giving 5 um filtered, regulated, lubricated air to the diverter actuators from a single treated point.
Is the AirTAC GFC400-15 Combination Unit (GFC40015MNWK) the Right Set?
This is the most specified variant in the list: 400 size, PT1/2 ports, manual drain, the fine 5 um element and the K reverse/check valve option. Choose it when the circuit needs both finer pre-filtration and the check-valve option at the regulator; if 40 um filtration is enough, the GFC40015MNK is the simpler code. Manual drain assumes someone blows the bowl down routinely - otherwise move to an automatic or differential-pressure drain code. No gauge is included, so consider a gauge option at ordering, and use the G or T thread suffix for BSPP or NPT pipework. Flow is published as curves, not a single rating, so ask us to confirm sizing against the application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC GFC400-15 Combination Unit (GFC40015MNWK) FAQ
Flow for the 400-size G series is published as characteristic curves, not as a single rated figure, so we avoid quoting one number. Give us your working pressure and air demand and we will confirm the sizing against the datasheet on request before you order.
GFC is the two-unit filter regulator plus lubricator set, 400 is the size, 15 is the 1/2 inch port, M is the manual drain, N means no gauge, W is the 5 um filter element and K is the reverse/check valve option fitted in the regulator section.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC400-15 Combination Unit (GFC40015MNWK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.