Airtac GFC Combination Unit GFC400C10F1WK
The AirTAC Airtac GFC Combination Unit GFC400C10F1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC400C10F1WK
GFC400C10F1WK is a genuine AirTAC G-series two-unit air preparation set - a 400-size filter-regulator and a 400-size lubricator on one assembly - that removes water and particulate, regulates downstream pressure and meters a fine oil mist to air tools and actuators. The W code selects the 5 um filter element, and the trailing K means a reverse/check valve is fitted. It is ported PT3/8 (3/8 in PT thread, the standard), uses the default differential-pressure drain, and includes the embedded square gauge scaled in MPa.
Maximum inlet pressure is 1.0 MPa (145 psi), working temperature is -5 to 70 C non-freezing, and the 400-size bowls are polycarbonate (PC). With the differential-pressure drain the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). Other G-series choices include sizes 200 to 600, ports from 1/8 to 1 in, automatic or manual drains, the standard 40 um grade, G (BSPP) or NPT threads, and psi or bar gauge scales. Flow is published as curves, so we confirm datasheet figures on request.
Airtac GFC Combination Unit GFC400C10F1WK Technical Specifications
| Model | Airtac GFC Combination Unit GFC400C10F1WK |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC400C10F1WK
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-C1 filter regulator and GL400-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · See datasheet · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC400C10F1WK Is Used
Maintenance shop rigs
A wall-mounted preparation point for the maintenance shop, feeding impact tools, test hoses and clamp fixtures with finely filtered, regulated, lubricated air.
Palletiser gripper circuits
Conditioning supply air to the grippers and clamps of a robotic palletiser, with the 5 um element protecting the pilot valves that meter each grip cycle.
Automated door and panel actuation
Driving pneumatic panels and sliding-door actuators on an automated production module, where the check-valve build is specified on the air preparation unit.
Is the Airtac GFC Combination Unit GFC400C10F1WK the Right Set?
The 400 size with a 3/8 in port is the mid-range G-series step; size up to 600 or a larger port for heavy demand, or down to 300 for light circuits, matching the port to real air use. This build combines the 5 um W element with the K reverse/check valve; omit K for the plain W set or specify the standard 40 um grade for general actuation. The differential-pressure drain regulates 0.15-0.9 MPa (20-130 psi), while A (automatic) or M (manual, 0.05-0.9 MPa / 7-130 psi) drains are orderable.
The square gauge reads MPa, with psi and bar scales available, and PT is the standard thread with G (BSPP) and NPT as orderable options. AirTAC publishes flow only as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-C1 filter regulator on its own.
Airtac GFC Combination Unit GFC400C10F1WK FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so no one number is quoted here. Tell us your line pressure and air demand and we will confirm the datasheet figures and check the 400 size and 3/8 in port against your application on request.
The trailing K codes that a reverse/check valve is fitted, on top of the W-code 5 um filter element. If you do not need the valve, GFC400C10F1W is the identical set without it; the rest of the code - 400 size, 3/8 in PT port, differential-pressure drain and square MPa gauge - decodes the same.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC400C10F1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.