Airtac GFC Combination Unit GFC400C10NW
The AirTAC Airtac GFC Combination Unit GFC400C10NW is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC400C10NW
GFC400C10NW is an AirTAC G-series two-unit air preparation set: a filter-regulator and a lubricator built together as one F+R+L package. It removes water and particulate from compressed air, regulates downstream pressure across a 0.15-0.9 MPa (20-130 psi) adjustment range, and meters oil mist to downstream actuators. This code is ported PT 3/8 in. and carries the optional 5 um (W) filter element for finer particulate removal than the standard 40 um grade. It uses the default differential-pressure drain and is supplied without a pressure gauge (trailing N).
This is a genuine AirTAC part. The GFC family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in., automatic or manual drain options, and G (BSPP) or NPT threads as catalogue choices; PT threading is the standard for this code. At size 400, the filter-regulator bowl and the lubricator oil bowl are both polycarbonate. Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application before ordering.
Airtac GFC Combination Unit GFC400C10NW Technical Specifications
| Model | Airtac GFC Combination Unit GFC400C10NW |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC400C10NW
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-C1 filter regulator and GL400-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · See datasheet · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC400C10NW Is Used
Offset printing press
Feeding impression and transfer cylinders on an offset press, with the 5 um element protecting the fine pilot valves in the press control circuit.
Food cartoner pick-and-place
Supplying clamp and pusher actuators on a cartoner, using the finer 5 um grade where compact control valves sit close to the filter-regulator.
Textile machine valve bank
Regulating air to the solenoid valve bank on a weaving machine, where fine particulate carried in plant air is a nuisance for compact spools.
Is the Airtac GFC Combination Unit GFC400C10NW the Right Set?
The W in this code selects the 5 um element; order the plain version if 40 um filtration is enough for the circuit. Port 10 gives a PT 3/8 in. connection, and the 400 size suits lines needing a larger port and flow path than GFC300. The differential-pressure drain fitted here is the zero-maintenance default; automatic (A) and manual (M) drains are orderable, with the regulator range becoming 0.05-0.9 MPa on manual drain. As an N-coded set it is supplied without a gauge, though the series offers an embedded square gauge or an external round gauge in MPa, psi or bar scales. AirTAC publishes flow as curves rather than one rated figure, so send us your conditions and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-C1 filter regulator on its own.
Airtac GFC Combination Unit GFC400C10NW FAQ
AirTAC publishes G-series flow as performance curves, not as a single rated figure, so there is no rated flow number for us to quote. Give us your working pressure and demand and we will confirm the sizing against the datasheet on request.
GFC400C10NW uses the default differential-pressure drain. AirTAC also offers automatic (A) and manual (M) drains in this series; with a manual drain the regulator adjustment range is 0.05-0.9 MPa, while automatic and differential-pressure drains run 0.15-0.9 MPa (20-130 psi).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC400C10NW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.