AirTAC GFC600-20 Combination Unit (GFC60020AF1K)
The AirTAC AirTAC GFC600-20 Combination Unit (GFC60020AF1K) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-20 Combination Unit (GFC60020AF1K)
GFC60020AF1K is an AirTAC GFC two-unit set for compressed air: a 600-size filter regulator paired with a lubricator, so one order covers water and particulate removal, pressure regulation and oil-mist lubrication. This configuration has a PT3/4 port, an automatic drain on the filter bowl, the standard 40 um filter element, an embedded square pressure gauge with MPa scale, and a reverse-flow (check) valve fitted so air cannot back-feed through the set.
This is a genuine AirTAC part. The G series is built in 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in. and PT, G(BSPP) or NPT threads; at 600 size the bowls are aluminium alloy, working pressure is up to 1.0 MPa (145 psi), temperature range is -5 to 70 C, and the regulator adjusts 0.15-0.9 MPa (20-130 psi) on this automatic-drain version. Rated flow is published as curves rather than a single figure; ask us and we will confirm the datasheet figures for your application.
AirTAC GFC600-20 Combination Unit (GFC60020AF1K) Technical Specifications
| Model | AirTAC GFC600-20 Combination Unit (GFC60020AF1K) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-20 Combination Unit (GFC60020AF1K)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-20 Combination Unit (GFC60020AF1K) Is Used
Pneumatic impact wrenches at vehicle repair bays
Feeds impact guns and ratchets at a service bench with filtered, regulated and oil-mist-lubricated air; the check valve stops air from back-feeding through the set from the tool side.
Pneumatic clamp cylinders on a panel press line
Supplies clamping cylinders on a furniture press, with the regulator set to the clamp circuit pressure and the 40 um element catching pipe scale and carried-over water.
Actuated diverters on a bottling conveyor
Keeps the pusher cylinders that move bottles between lanes supplied with clean, regulated, lubricated air across a shift while the automatic drain clears the bowl on its own.
Is the AirTAC GFC600-20 Combination Unit (GFC60020AF1K) the Right Set?
Size 600 with a PT3/4 port is the step to take when your circuit is built around 3/4 in. piping and higher air demand; smaller 200-400 sizes use smaller ports and suit lighter duties. The A in the code gives an automatic drain, so condensate leaves the bowl without operator attention, and this drain type carries the 0.15-0.9 MPa (20-130 psi) adjustment range. The 40 um standard element suits general plant air; choose W for 5 um. The F1 gauge is the embedded square gauge on an MPa scale (F2/F3 give psi/bar). PT is the standard thread; G and NPT are catalogue options.
Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your pressure and demand before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC GFC600-20 Combination Unit (GFC60020AF1K) FAQ
AirTAC publishes G-series flow as performance curves, not a single rated figure, so we do not quote a number here. Tell us your working pressure and air demand and we will confirm the datasheet curve for this 600-size, PT3/4 set before you order.
K means a reverse-flow (check) valve is fitted, so air cannot flow back through the set. Drop the K for the standard version, and if you need psi or bar on the square gauge instead of MPa, the catalogue scales are 2 and 3.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-20 Combination Unit (GFC60020AF1K)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.