AirTAC GFC600-20 Combination Unit (GFC60020AF1W)
The AirTAC AirTAC GFC600-20 Combination Unit (GFC60020AF1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-20 Combination Unit (GFC60020AF1W)
GFC60020AF1W is an AirTAC GFC two-unit set for compressed air: a 600-size filter regulator paired with a lubricator, covering filtration, pressure regulation and oil-mist lubrication in one order. This version carries the W option, a finer 5 um filter element, plus a PT3/4 port, an automatic drain on the filter bowl, and an embedded square pressure gauge with MPa scale.
This is a genuine AirTAC part. The G series runs from 200 to 600 size with ports from 1/8 in. to 1 in. and PT, G(BSPP) or NPT threads; the 600-size bowls are aluminium alloy, working pressure is up to 1.0 MPa (145 psi), temperature range is -5 to 70 C, and the regulator adjusts 0.15-0.9 MPa (20-130 psi) on this automatic-drain version. Rated flow is published as curves rather than a single figure; ask us and we will confirm the datasheet figures for your application.
AirTAC GFC600-20 Combination Unit (GFC60020AF1W) Technical Specifications
| Model | AirTAC GFC600-20 Combination Unit (GFC60020AF1W) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-20 Combination Unit (GFC60020AF1W)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-20 Combination Unit (GFC60020AF1W) Is Used
Air supply for lab-scale pneumatic test rigs
Feeds bench test fixtures where the 5 um element suits circuits with finer pneumatic components, with the regulator trimmed to the test pressure and the lubricator conditioning the actuator air.
Pick-and-place modules on an electronics assembly cell
Supplies the small cylinders of a pick-and-place gantry with regulated, lubricated air, with 5 um filtration ahead of the valve stack.
Air tool stations in a truck maintenance workshop
A wall point where mechanics plug in impact wrenches and ratchets; the automatic drain keeps the bowl clear and the lubricator mists oil into the tool air.
Is the AirTAC GFC600-20 Combination Unit (GFC60020AF1W) the Right Set?
Take 600 size with the PT3/4 port when your line is built on 3/4 in. piping and the circuit draws a larger air volume; step down to 300 or 400 for lighter duty. The A code gives an automatic drain, so the bowl clears itself, and this drain type carries the 0.15-0.9 MPa (20-130 psi) adjustment range. W selects the 5 um element instead of the standard 40 um, the right call when finer components sit downstream. F1 is the embedded square gauge on MPa scale; psi and bar scales are catalogue options. PT is standard; G and NPT can be ordered.
Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC GFC600-20 Combination Unit (GFC60020AF1W) FAQ
AirTAC publishes G-series flow as curves, not a single rated number, so we do not state one here. Send us your operating pressure and demand and we will confirm the datasheet curve figures for this 600-size, PT3/4 set on request.
The blank element grade is 40 um, which suits general plant air. The W option filters to 5 um, the right choice when finer valves or components sit downstream. Both grades are catalogue options on the same GFC600 body with the same PT3/4 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-20 Combination Unit (GFC60020AF1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.